Electronics Forum | Sun Aug 23 22:13:45 EDT 2009 | joannetjy
Hi All, Recently, I need to deal with a customer complaint that specify the PCBA white residue (flux residue from ecofree 303) may be the reason why the board intermittent. Anyone have such experience with this flux? Anyone can tell me is this flux
Electronics Forum | Mon Aug 24 03:59:26 EDT 2009 | hurr
Hallo Joanne, I had employed by producer of Ecofrec 303. We make many tests of corrosion and conductive test in our company. All results of this tests was OK . Vast majority correspond mil standarts. When I ask my labor assistent in BRY, white residu
Electronics Forum | Mon Aug 24 04:46:54 EDT 2009 | joannetjy
Hi Radek, Thanks for your reply. I use this flux with manual soldering process for the product. Is this flux suitable for manual soldering? or it is only for wave soldering? I have sent the board for analysis, and the report shown that the white res
Electronics Forum | Mon Aug 24 06:12:31 EDT 2009 | ghepo
joanne please pay attention, each heavy no-clean flux residues not completely heated due to hand soldering becomes a moisture absorbing conductive pathway, causing electrical leakage. So I suggest you to clean well the board after hand soldering or
Electronics Forum | Mon Aug 24 07:32:34 EDT 2009 | hurr
Hi Joane, this flux is primarily designed for wave soldering. I think that manual soldering it´s possible. Certainly it´s very hard to dispensing correct amount of the flux. Succinic acid is one from all ingredients of this flux. If you have this
Electronics Forum | Thu Sep 05 10:49:43 EDT 2024 | dontfeedphils
We use RC303 from Zestron. Works pretty well.
Electronics Forum | Thu Jan 17 18:09:09 EST 2002 | Bill Loving
Dear Dave F. Please note that ScanCAD International Inc. moved to a new building in 1995 and the current address and contact information is: www.scancad.com ScanCAD International, Inc. P.O. Box 598 Morrison, CO 80465-0598 Phone: 303-697-8888, Fa
Electronics Forum | Tue Dec 18 21:38:38 EST 2007 | davef
Try: * CoorsTek Corporate Headquarters; North Table Mountain, 16000 Table Mountain Pkwy, Golden, CO 80403; 800-821-6110 303-271-7000 F303-271-7009 http://www.coorstek.com * Kyocera America; 8611 Balboa Ave, San Diego, CA 92123; 800-468-2957 F858-569
Electronics Forum | Wed Feb 13 17:33:07 EST 2002 | Sheri Connor
Hi Dave, I wanted to make sure you have current contact information for us: ScanCAD International, Inc. PO Box 598 19181 Hwy 8 Morrison, CO 80465 Phone: 303.697.8888 Fax: 303.697.8580 Not only do we sell our scanning systems, we also have a Serv
Electronics Forum | Mon Nov 07 20:27:33 EST 2005 | davef
* Singulation (Wand 708.459.2400fax2421, Circuit Technology 708.705.2140fax2141 John Bambule, Pioneer - Dietecs (508)-643-2297 Fax: 2295 Gerry Larson) * Routing (Cencorp 303.530.0891 bill stranathan 303.772.5933x227, 0Z0 Automation 800.366.0401 Chip
