Electronics Forum | Mon Feb 19 12:45:30 EST 2024 | davef
Search for 163368 on SMTnet. Look in the list further down on this page https://smtnet.com/parts/index.cfm?fuseaction=view_item&item_id=165987&company_id=54555 Contact Qinyi Electronics Co., Ltd and ask for Cosima (
Electronics Forum | Wed Feb 14 23:56:06 EST 2024 | jborrelli76
We have a DEK Horizon 05 with stencil clamps operational on left side only, right side non-opertional. Any ideas where to get started troubleshooting?
Electronics Forum | Fri Feb 16 13:29:53 EST 2024 | mistrthou
We don't have that machine, but our other DEK's all share a solenoid. Air for both sides should be on or off all together. I'd check for an air supply to the clamps that switches when commanded to clamp or unload.
Electronics Forum | Fri Feb 16 21:51:15 EST 2024 | jborrelli76
I was correct...the cable that operates the stencil clamps on the right bank is severed...do you know where I can get a replacement cable part number 163368? Thanks.
Electronics Forum | Fri Feb 16 17:04:17 EST 2024 | jborrelli76
Thanks, will do. The point that's odd is one side functions. I think there may be a cable that causes each bank to clamp that may be broken. Time to get my hands dirty...
Electronics Forum | Thu Feb 29 04:26:27 EST 2024 | jborrelli76
A spare part due very soon, now to change it out. I think I have to remove the entire right arm...suggestions or guidance WELCOME. Thanks!
Electronics Forum | Tue May 23 22:36:46 EDT 2006 | davef
Look here: http://www.mininova.org/tor/297048
Electronics Forum | Fri May 19 09:34:56 EDT 2006 | Mark
I was wondering if anyone has the last 10 minutes of the Modern Marvels (Engineering Diasers 19) on a file they can send me? It talks and discusses the tin whiskers and problem with using tin.
Electronics Forum | Sat Dec 05 22:08:21 EST 2009 | casmt
MY9 - 19 are all the same machines. The frame is only bigger. With the 19 you can get up to 256, 8mm feeders if it has the stand table. Ocourse that is an advantatge it can handle large boards with a big table. I have used Mydata a many companys. A
Electronics Forum | Thu May 07 01:09:02 EDT 2020 | kylehunter
We've definitely changed our bare board source. Now are using a mix of USA based and South Korean. Helps to have some extra options..