Electronics Forum | Mon Dec 04 18:12:45 EST 2006 | Say
Does anyone have a tpsys 1.4.7 software or the servo? Please contact me at sbounsavath@rad-tech.net or call me at 818-381-8500 ext.555. -Say
Electronics Forum | Mon Jul 01 16:32:02 EDT 2002 | lysik
The software version is actually 1.4.7 I want to be able to use the feeders with the blue buttons. I bought the machine second hand.
Electronics Forum | Thu Jul 01 12:43:40 EDT 2004 | davef
For a quantatative measure of solder spread use: * IPC-S-804/805 * Mil-F-14256E,4.7.5
Electronics Forum | Thu Feb 11 20:36:18 EST 2021 | tsauve
1.Yes but you want specific SPI & AOI machines. Same manufacturer can provide both. 2. Yes but not as well as an SPI machine. 3. Don't understand question. 4-7 You should do your research, or hire someone with the expertise you require.
Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When
Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When
Electronics Forum | Thu Oct 02 10:55:37 EDT 2003 | caldon
Brad- The Spec can be downloaded free from IPC at http://www.smema.org/smema1.2.pdf (or IPC.org search for SMEMA Standards). As per Conveyor edge clearance should be .187" or 4.7mm. Regards, Cal Communications Test Design, Inc. www.ctdi.com
Electronics Forum | Thu May 06 08:59:25 EDT 2004 | davef
Even with PbSn solderpaste the leadfree BGA's have a superior resistance to solder-joint fatigue failure when compared to conventional parts. [Solder Fatigue Reliability Issues in Lead Free BGA Packages, Pedro Chalco of IBM, Pan Pacific Microelectron
Electronics Forum | Tue Oct 02 10:30:10 EDT 2012 | eniac
Difference in pick height from paper and embossed reel (typically) is 0.2 mm. Try to change your pick height and place height (different type of capacitors have a different height: for 100 nF 0603 and for 4.7 uF 0603 it's a big difference!). Can you
Electronics Forum | Thu Feb 14 17:00:42 EST 2013 | richardc
I am trying to use Mydata TM8C feeders that work fine on a TP93 running 1.6.18 TPsys but are not recognized by a TP94 machine running 1.4.7 TPsys. I get a green flashing light instead of a solid green. I can initialize the hardware but can not proc
