Electronics Forum | Tue Feb 16 14:40:54 EST 1999 | john hearty
Has anyone changed out the old 4400 vision processor on a Fuji IP3 and replaced it with a newer 4800 vision processor. What does it take to do this and what does it consist of doing. What do I need to order from Fuji in order to do this.
Electronics Forum | Sat Aug 08 09:45:11 EDT 2015 | edwaterfall01
It would be helpful to know what happened before the error occurred. Do you have another machine so that you can swap some boards? The Force CPU, (machine controller) located in the VME, is responsible for controlling all machine-related activities.
Electronics Forum | Fri May 14 07:06:47 EDT 2004 | stefwitt
None of the vision systems can really �read� a black object. In order to recognize an object a light source is required. The light is reflected from the object through an optical lens to the CCD chip. There is almost no light coming back from a black
Electronics Forum | Thu Jun 23 13:43:29 EDT 2005 | Stefan
I fear your files are not stored in the default directory or your hard drive is full. Boot with a DOS boot disc and check your C drive for program and fiducial information. Try an older program to check if the program structure and vision informatio
Electronics Forum | Sat Apr 10 00:19:06 EDT 2021 | mi123ms
I just purchased an Assembleon Sapphire machine and am new to Assembleon machines, and on startup it states "Download Vision Data NG", does this mean the processor board can't download the vision data to the vision board? I have spare boar
Electronics Forum | Sun Apr 18 19:55:21 EDT 2004 | Ken
Sounds reasonable. If there was NC flux "crud" on the balls, the vision processors of our P&P would have detection issues.
Electronics Forum | Tue Sep 11 12:36:29 EDT 2007 | chrisgriffin
Sounds like the Cognex vision processor in the PC is bad. There is really nothing you can do but buy a new one. These typically run between 5k to 9k. Good luck
Electronics Forum | Mon Sep 05 20:28:37 EDT 2011 | enrad
Does anyone have any type of information regarding this vision processor, it seems that it was quite common during the 90's
Electronics Forum | Fri Jun 10 21:22:36 EDT 2005 | KEN
JD, fiducials are merely land marks. The vision processor will measure the actual location and compare it to the CAD location. It does not care if the design is symetrical, asymetrical or what. In the case of a single center design fiducial (which
Electronics Forum | Mon Aug 18 16:54:46 EDT 2008 | jlawson
Great to see running. The Vision Monitor Video comes from the Vision Processor Card, including overlay info, grids etc depending on mode you are in, like teaching etc Why is is on still I can not say, could be software version, there was several ve
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
.gif)
