Electronics Forum | Tue Sep 03 05:37:06 EDT 2013 | bobpan
It sounds like your dispenser has a problem....The default mod code for 56 is 0 (this should be off). Thats why when you cleared the mod codes the machine was able to home. When you reload your saved mod codes it is probably set to 1. The machine wil
Electronics Forum | Mon Aug 23 12:47:53 EDT 2004 | mmjm_1099
Here's some codes.... maybe not ones you need but worth a look. http://clivetec.0catch.com/SMD_Codes1.htm
Electronics Forum | Thu Jan 11 08:20:55 EST 2007 | davef
Marking * SMD marking list on http://www.tkb-4u.com is more update than "The SMD Codebook" on http://www.marsport.demon.co.uk/smd/smdcode.htm * http://www.marsport.demon.co.uk/smd/mainframe.htm * http://www.chipdocs.com/pcat/015/1124.html * http:/
Electronics Forum | Fri Sep 06 12:34:00 EDT 2013 | bobpan
Your firmware is so old that the problem is not in the mod codes anyways. You have a problem with the cyberoptics head. If its not working at all, i would remove the lens assy on the front side where the cable plugs in and blow out the unit. Maybe if
Electronics Forum | Thu Sep 08 13:07:18 EDT 2016 | claudea2
Hello Bob, we changed the nozzle z parameter until we got limit errors and backed up 1 mil. There was a slight reduction in the limit errors on the pickup of the component but it is still a problem. With the mod code we adjust the soft z height to ab
Electronics Forum | Tue Nov 08 07:23:03 EST 2011 | leemeyer
Thanks Bobpan, A function 6 tells me that I have firmware ver IVC 3.05. I keep getting a motor error 4 "The Xand/or Y axis did not reach the commanded position within 500 msec." The battery was dead on this machine so the mod codes were lost. I en
Electronics Forum | Fri Nov 18 08:35:20 EST 2011 | bobpan
try this..... I think there is a coupling for the theta motor....make sure both set screws are tight.....maybe the theta is slipping. Make sure there are no bright lights shining into the machine....maybe even throw a dark cover over the top and try
Electronics Forum | Thu May 26 14:06:03 EDT 2016 | stevedc
I did clean both lenses from the outside and checked all the MOD codes. I even removed the battery to reset everything and re-programmed all the codes but to no avail. I will strip it down and fully clean it to see if that helps. Just strange that
Electronics Forum | Sat Jul 22 07:22:37 EDT 2006 | davef
Marking * SMD marking list on http://www.tkb-4u.com is more update than "The SMD Codebook" on http://www.marsport.demon.co.uk/smd/smdcode.htm * http://www.marsport.demon.co.uk/smd/mainframe.htm * http://www.chipdocs.com/pcat/015/1124.html * http:
Electronics Forum | Thu Sep 20 12:49:03 EDT 2012 | JB
Ok, Think I have got it now. After finding the last letter is a batch code or something, I found "The SMD Code Book" and it looks like it is MMSZ4703-V-GS08. I'll wait to see what the components turn up looking like.
.jpg)
