Electronics Forum | Wed Oct 08 14:19:07 EDT 2008 | sambolian
I don't have that as an option. I'm using 5.31 version.
Electronics Forum | Wed Oct 08 14:36:55 EDT 2008 | sambolian
I programmed it by hand and my version of central controller is v7.54.
Electronics Forum | Wed Oct 08 12:41:08 EDT 2008 | sambolian
I having trouble with the Quad IIc. After manually teaching a program at the machine, I upload to save it, then when I go to "Run System", it downloads the program, but then an error comes up saying "Fiducials not taught, press ESC to abort". I've tr
Electronics Forum | Wed Oct 08 12:49:37 EDT 2008 | leemeyer
When in the fiducial teach screen check to see if the "Fiducial Data from Autoprogram" box is checked. If this program was not generated from Autoprogram this box should not be checked.
Electronics Forum | Wed Oct 08 13:30:04 EDT 2008 | bobpan
You need to check and see what you have 'y' set to in teach fiducials. Make sure you have only 1 with a 'y'(panel or multi-image fids)....then teach the appropriate one.
Electronics Forum | Wed Oct 08 14:20:34 EDT 2008 | sambolian
I only have 'Y' in the "Global Fiducial Correction" box , but it still gives me the error of "Fiducials not taught". Any more suggestions?
Electronics Forum | Wed Oct 08 14:30:42 EDT 2008 | leemeyer
Was the board programmed using Autoprogram or did you hand program it? What version of Central Controller are you running.
Electronics Forum | Wed Oct 08 15:46:41 EDT 2008 | bobpan
ok....couple of other questions first......does your machine say MVS when entering into central controller? After you teach your fiducials...Are you entering out of the screen....if you hit escape it doesnt save what you have done.
Electronics Forum | Wed Oct 08 16:31:44 EDT 2008 | sambolian
Yes, it does says "Sending MSG to MVS" and yes, I am entering out of the teach screen.
Electronics Forum | Wed Oct 08 14:55:50 EDT 2008 | leemeyer
In the teach menu of Central controller and under Teach Board Fiducials there should be 6 options. Turn on Global Fiducial Correction by putting a Y in the box. Make sure all others including "Fiducial Data from Autoprogram" have an N in the box. Use
winsouce.jpg)