Electronics Forum | Wed Feb 08 17:37:06 EST 2023 | compit
5 to 5 :) 7 is ground in DB-25 version
Electronics Forum | Thu Oct 19 00:58:13 EDT 2000 | PeteC
Also, what about the gap spacing on your machine between the top of the second wave baffle to the bottom of the finger? Ours is at 5.7mm. Thx.
Electronics Forum | Mon May 10 07:53:30 EDT 2004 | pjc
most machines have fixed angle of 6 deg. some are adjustable from 5 - 7 deg., but 6 is most popular.
Electronics Forum | Mon Apr 03 15:35:58 EDT 2006 | Debbie
http://www.quickturnflex.com Quick Turns 5-7 business days 1-6 layer 10-12 business days 1-8 layers Standard Delivery 15-17 business days Up to 12 layer 20 business days All products
Electronics Forum | Mon Nov 07 04:43:02 EST 2005 | lupo
About the anlge typically is 5-7 depending on the machine. If solder smt components, the best is to use (swich on) double wave machine - (swich on both) chip and laminar wave. Regards.
Electronics Forum | Fri Dec 09 06:33:01 EST 2016 | cyber_wolf
Hold on Carlo, You are saying two different things, you are saying "(Zones 3,4,5,7 & even Cooling Zone). PV exceeds about 5-10 degrees with the SP. (ex: SP=140deg, actual PV = 145deg & higher). " Then you say: "the board reach up to 145 deg. 5 deg
Electronics Forum | Fri Oct 03 09:00:18 EDT 2003 | davef
EIA standard packages have a variety of L/W proportions. EIA||Dimension mm (LXW)||Proportion (L/W) 0201||0.6X0.3||2 0202||0.5X0.5||1 0303||0.8X0.8||1 0402||1.0X0.5||2 0504||1.25X1.0||1.25 ||1.4X1.4||1 0603||1.6X0.8||2 0805||2.0X1.25||1.6 1111||2.8X2
Electronics Forum | Tue Feb 28 17:45:56 EST 2012 | acsscott
So, got the Topaz X up and running. It has (4)FNC nozzles on 2, 4, 6, 8, and (4)74A Nozzles on 1, 3, 5, 7. We are trying to optimize it to pick up 8 components, then move over the camera, then to the PCB and place them. In the Mount data, we load
Electronics Forum | Thu Jul 22 14:44:30 EDT 1999 | Scott McKee
| I am looking for some recommendations for a cleaner for rosin flux. | | James | Popular is an Organic Saponifier Cleaner from Alphametals, the name is 2110. Requires a 5%-7% mix ratio with DI water. IPA is also used but is getting on the "no n
Electronics Forum | Fri Aug 14 10:26:55 EDT 1998 | Mike Konrad
5 micrograms per sq. cm. is actually not too clean. The maximum military allowed post-clean, on-board contamination is 5.7 micrograms of NaCl /cm squared (when using the Zero-Ion brand ionic contamination tester). We are use to seeing cleanliness re
