Electronics Forum | Wed Feb 13 12:24:26 EST 2019 | aldrich17
Does anyone happen know where i can find an R alignment tool? Part number 5322 395 10879. Also a disassemble shaft tool. Part number 5322 395 10877
Electronics Forum | Wed Jul 17 16:54:27 EDT 2002 | davef
Is it OK? �Is it OK?� => We have no earthly idea if this will shorten the life of your product. We don�t know your product from a shoebox. ;-) Seriously, exposed basis metal could have a variety of effects, depending on the product design and end
Electronics Forum | Wed Jul 17 11:52:54 EDT 2002 | tmarc
Hello all, I have a question about OSP. The solder mask over traces leading to SMT pads, in some instances, does not cover all the way to the pad. Of course the stencil apertures do not include traces. After the SMT and reflow process, there is visib
Electronics Forum | Tue Oct 16 18:00:52 EDT 2007 | jmelson
Oh, heh heh, I DO have the manuals for the III series of machines, including the spare parts manual. Maybe I can scan the detail of the drawing in question, and see if that looks like your machine. I can also get the exact model number range that m
Electronics Forum | Thu Feb 22 05:33:51 EST 2001 | mattias
Hello all I just wanted to spread the word regarding the use of sugar to remove burnt-in flux. Dissolve sugar into warm water and spray it on the area that You want to clean,let it work for a short while and rub. If you want to do it the manual wa
Electronics Forum | Tue Feb 07 05:40:16 EST 2006 | pavel_murtishev
Good day, J-STD-033A: 4.1.2.2 Moisture Sensitivity Levels 5-5a For moisture sensitivity Levels 5 and 5a with floor life exposure not greater than 8 hours, a minimum desiccating period of 10X the exposure time is required to dry the SMD packages en
Electronics Forum | Thu Mar 14 19:08:56 EST 2002 | stevezeva
Hi ya'll! I know this is going to be an extreme longshot, but I'm in desperate need of a Assemblion Emerald 54mm front light camera mirror (part number 5322-380-10285). Ours got cracked somehow (still haven't found out how, probably never will...
Electronics Forum | Thu Oct 04 00:07:29 EDT 2018 | gaintstar
flason smt SMT spare parts: http://www.flason-smt.com/product/SMT-spare-parts-Assembleon-Controller-Bvm-5322-216-04698.html http://www.flason-smt.com/product/SMT-spare-parts-Assembleon-Control-V2-1-Rev-B-8mm-4022-594-10010.html http://www.flason-smt
Electronics Forum | Tue Aug 02 15:05:38 EDT 2011 | davef
A couple of points: * Just a nit, 'screens' fell in disuse 10-15 years ago. Old habits die slowly don't they? * Yes, DEK and MPM each hold about 50% of the solder paste printer market and about 4 or 5 others hold the rest. SOLDER PASTE PRINTER EQUI
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
