Electronics Forum | Thu Apr 09 09:42:12 EDT 2015 | fzpd2000
I am looking for high quality polyimide PCB manufacturer. I have seen a few with the labels: NIX-6-0 Anyone knows who makes these boards? Or other good polyimide PCB builders? Any comments are greatly appreciated. F.Z.
Electronics Forum | Mon Sep 04 10:49:59 EDT 2017 | sarason
In Eagle 6.0 and later you can edit the XML directly it should be fairly trivial. Then download the Eagle free package from the CADoft website to view and it should be okay regards sarason
Electronics Forum | Wed Dec 07 11:58:36 EST 2005 | derengmao
Could you help to tell what is the way to pick/place 0402/0201 using QSA30? Also do you know that without a VME bus Control B/D (illumination card for fixed camera), the new version software (ver.6.0 and above) will not initialize the vision system.
Electronics Forum | Thu Mar 23 00:37:47 EST 2000 | Donnie DeYoung
Thanks guys. We are currently using an Opti Flux fixed spray head at 10 to 20 psi. We were using the 351 flux at 60 psi before this, so as you can see we found that there's a huge difference here. We are currently running a conveyor speed at 5.0 FPM.
Electronics Forum | Wed Dec 07 12:56:27 EST 2005 | bobpan
If you are referring to having the control knob on the head for the lighting or controlling it through the software... then...version 6.0 works for both. Make sure you go into scp.ini and turn on\off light control. For 0402 parts......you must have
Electronics Forum | Thu Oct 08 15:48:52 EDT 1998 | Michael Bryant @ SMTnet
Hello everyone, In the past, there have been forum messages asking for a list of SMT related definitions. Thanks to a great deal of assistance from some of your fellow SMTneters we have added a list of SMT terms and definitions to our library that s
Electronics Forum | Fri May 27 11:12:04 EDT 2005 | Ray
We have switched from Uniscam due to support issues and their ablity to come out with a new USABLE version. We have been running it for close to 2 years now and we have been extremely happy with its performance and their support. Version 6.0 which
Electronics Forum | Fri Mar 31 21:52:43 EST 2006 | mrduckmann2000
SJ, We too have been running Intuitve for well over 2 years now. It does have it's issues, but what software package is perfect. The tech support that we have used has been EXCELLANT, with in 2 to 3 hours. We started with version 6.0, we have bee
Electronics Forum | Sun Feb 18 16:47:34 EST 2007 | darby
As I stated, the reply was direct from Indium, (thanks to Rich Brooks). The information regarding cool down rates should come from your paste supplier; not an oven supplier; not a generic article on lead free. I just went through the data sheets from
Electronics Forum | Wed Jan 13 04:27:00 EST 2016 | crystalpcb
Hi Here is our factory production capability: Shenze Electronic PCB Specification Layer Count 1 to 35 Layers Material Brand Shengyi,KB,GRACE,ISOLA,Rogers,Taconic,ARLLON,Bergquist Base Material FR-4（TG135,TG150,TG170,TG180），Halogen Free FR-4，Ceramic
winsouce.jpg)
