Electronics Forum | Mon Jun 15 23:19:38 EDT 2020 | kylehunter
You literally just loosen both hex bolts and slide the bar to the pitch you want. Then tighten the bolts. You can also remove the bar, and flip it over to get additional pitches.
Electronics Forum | Thu Apr 18 12:29:16 EDT 2024 | digitalshovel
Hey, thanks for the response, i tried looking at the POS file and there were no errors or special characters. the machine has a feeder set check error. do we have to assign the part with feeder on the cm602?
Electronics Forum | Thu May 27 07:04:42 EDT 2010 | dervinsanjose
Anybody who could help me what is the tape peel off speed of PANASONIC CM602 for 8mm feeder? Appreciate your feedback.
Electronics Forum | Thu Apr 18 13:18:02 EDT 2024 | sarason
Yes the component lists contains the Feeder ID sarason
Electronics Forum | Tue Mar 05 06:42:22 EST 2019 | cyber_wolf
This is for a specific type of CP43 feeder. It does not work on CP6 feeders. You also have to have the base it bolts onto, the standard, and the calibration tapes.
Electronics Forum | Tue Apr 02 17:22:50 EDT 2013 | microaide
That makes some sense. By knowing the coordinates of the leftmost and rightmost feeder, the others can be interpolated. As long as they are all the same type of feeder. But I still don't see how to configure an assortment of different types of vibrat
Electronics Forum | Thu Oct 22 22:09:43 EDT 2015 | myleb
Hi Nhel, You meant the IO board in the Feeder Cart burst, right? Very interesting case here... Thanks for sharing.
Electronics Forum | Tue Apr 16 18:28:16 EDT 2024 | digitalshovel
The problem I'm facing is an error indicating that the parts name is incorrect. (and gives the feeder address details) Could you please provide guidance on how we can rectify this issue?
Electronics Forum | Tue Aug 25 18:25:15 EDT 2009 | swag
If you have access to a machine shop you can build your own easily using the same bolt/tooling pin pattern as tracks. Place them on a vibratory track base and disconnect or turn the vibe down.
Electronics Forum | Thu Feb 28 12:16:08 EST 2019 | cyber_wolf
I have a CP43 calibration jig in excellent shape. Free to a good home. This is the jig that bolts to the stand with the microscope. I DO NOT have the stand with the microscope. See photo
