Electronics Forum | Fri Jun 02 17:43:17 EDT 2000 | Dave F
James: I believe Delmat is a proprietary product. Check with some of the solder fixture fabricators in the archives. Continuing, I would not select knowingly Delmat as a board stiffener. It's a composite material similar to oriented strand board
Electronics Forum | Fri Dec 10 01:02:36 EST 2010 | sparrow
Hello, our products are made on single-sided boards and we often have problems with receiving too warped PCBs from our suppliers. Can anybody suggest a good laminate or the most important properties of the material so we could specify it when we orde
Electronics Forum | Sat Jan 12 11:47:25 EST 2019 | ranap121212
I am looking for a good material for selective nozzle. We are currently using Kovar but it is expensive and wears out it has very good wetting properties.I looking for a material or coating that would allow me to keep the binder flow and with less co
Electronics Forum | Tue Jun 06 15:45:18 EDT 2006 | slthomas
Yep. What I'm really looking for is the minimum radius of curvature for 63/37, which is a function of it's surface tension. It's physical properties issue, not an agency issue. I've seen some references that I have interpreted to mean that it's some
Electronics Forum | Wed Aug 30 16:00:42 EDT 2000 | Dave F
Russells: You can mix the two solders you mentioned, assuming by "96s" you meant "96Sn / 4Pb". If you heat the two tin / lead alloys to a liquid state, you�ll form a tin / lead solution with properties different from either of the two solders. The
Electronics Forum | Tue May 27 12:40:50 EDT 2003 | davef
Hi Bill You said, "silicon". We assume by your discussion that you ment to say, "silicone". For background on silicone and soldering, check with Dow Corning [517-496-6000]. They make a OS2 [VOC-free] silicone stripper and should be able to give y
Electronics Forum | Tue Jul 19 09:18:14 EDT 2011 | davef
Could this be an opportunity to explore the use of cartridge-type paste dispensers? Or maybe a reason to keep working over the weekend. * Re-Storing & Re-Using “Used” Solder Paste. Though not a recommended practice, used solder paste from the stenci
Electronics Forum | Tue Jan 29 09:19:56 EST 2002 | bob_smith
Can someone tell me what metal substrates are comonly used for component leads with gold plating? If the gold plating is missing, are any of the substates incompatible with 63/37 solder? Thanks.
Electronics Forum | Mon Sep 08 02:39:37 EDT 2008 | akareti
By connector, you mean socket? Connector use for board to board connection from FCI, MFG P/N: 84500-202 What is the material of the connector(socket)? Is it very frigale? Housing: liquid crystal polymer Solder ball: SnPb 63/37 how big are the bal
Electronics Forum | Tue Jan 21 11:03:15 EST 2003 | MA/NY DDave
Hi You already received good answers. A thing to remember is the components and the PCB. How high you go above 63/37's 183C should be limited to create a good solder joint. Too long creates problems since the components and the PCB start to be he
