Electronics Forum | Wed Aug 09 18:24:30 EDT 2006 | SWAG
Great advice, all. Thanks much. I called on the Tribol 930 and there is now a blend called Tribol 1421 that is good for higher temps. Speedline recommends in place of 930 if you wish to do so. Might be something to consider for lead free stuff.
Electronics Forum | Fri Apr 07 11:52:44 EDT 2000 | Ashok Dhawan
Can anyone suggest a cleaning solvent for removing silicon residue after K Tape has gone through 2 cycles of reflow soldering ? The solvent or cleaning method has to be compliant to IPC Standards - to be used for cleaning gold edge fingers - PCB asse
Electronics Forum | Fri Apr 07 16:10:44 EDT 2000 | Chris McDonald
Kapton Tape should not leave a residue. But Ive seem cheap Kapton do that. Anyways I have gotten a stencil cleaner soldevent to clean off tape residue (Multicore has a good one) It will meet IPC. Chris
Electronics Forum | Tue Dec 02 16:45:43 EST 2003 | Paul Standeven
Assembl�on America sells the SMD double splice tape you reference under part# 9469.930.74000. To order, call 1-800-4-PHILIPS and press "2" for Spare Part or Accessory orders. The tape comes in a box of 500 pieces. Enjoy!
Electronics Forum | Wed Aug 09 16:46:49 EDT 2006 | nitro
We use the Tribol 930/100 Synthetic oil. Also, check the drive motor chain on the output end of the oven. I have seen the set screws back out of the drive gears, and it will kind of pop at times while running.
Electronics Forum | Mon Aug 14 13:27:56 EDT 2006 | nitro
It is Castrol. We have a 4.49 gal. can of the 930. Don't know any history of where we got it, or how much we paid.
Electronics Forum | Thu May 24 01:46:45 EDT 2018 | wchen930
ME ! High quality , Fast lead time , Reasonable Cost it gotta be me www.lmpcb.com Free Quote gerber goes to wchen930@lmpcb.com
Electronics Forum | Mon Mar 27 02:08:25 EST 2006 | AR
Up till now we have been using the Tribol 930 but it is practically impossible to obtain here in Europe at least. Speedline is extremely reluctant to sell it for some reason that I cannot figure out. Currently we are testing Anderol XL 220 but it is
Electronics Forum | Mon Mar 27 11:03:06 EST 2006 | mapell
Tribol 1430 is the latest generation oil, 930 can't take lead free temps. Please see the following link.... http://www.castrol.com/castrol/productdetailmin.do?categoryId=82958955&contentId=6004371 If your getting alot smoke and residue, reduce the
Electronics Forum | Mon Sep 10 14:42:42 EDT 2007 | cyber_wolf
How big is the cap ? We successfully reflow caps that measure aprrox .750" x 750" at the base and are .678" tall. The ovens we use are Vitronics XPM's.(1230,1040 and 930) We also process these caps through our Omniflow 10. As stated, oven length wi
.jpg)
