Electronics Forum | Wed Nov 29 14:58:42 EST 2006 | eds
Does anyone have or know of a Polar Instruments ToneOhm 950 Short Locator, that they are willing to part with? Please advise.
Electronics Forum | Wed Nov 29 16:05:45 EST 2006 | darby
I have a long locator if that is of any use to you.
Electronics Forum | Sun Jun 07 11:47:10 EDT 2020 | saduquette
Hi, I went to run my IVC yesterday and it got a Motor Error on first pickup. Pressing Enter showed Z:-27:0 So according to the manual that means the Zaxis was commanded to go to -27, but the limit is '0'. I tried a Function 3 on that pickup and
Electronics Forum | Wed Feb 17 09:38:25 EST 1999 | Jesse Smith
We have machines here that refurbish SOJs, DIPS, PGAs, TSOPs, SOICs, and most QFP. for detailed information call Jesse Smith 800-950-3344 ext 1837
Electronics Forum | Sun Oct 17 23:07:04 EDT 2010 | Jack
Thanks Florin Yes, XD7800NT950 is capable to inspect our such big board. And, there is local distributor,too. now, we decide to check with Viscom and Dage. Thanks you again. Good days ahead.
Electronics Forum | Wed Mar 01 07:45:56 EST 2006 | davef
Consider: * Equipment Inspection acoustic microscope [Scanning Acoustic Microscopy (SAM)] MicroPhotonics 4949 Liberty Lane, Suite 160, PO Box 3129 Allentown PA 18106 610.366.7103 fax 7105 http://www.microphotonics.com * Equipment Inspection acoustic
Electronics Forum | Wed Mar 29 18:17:16 EST 2000 | David
Does anybody out there have experience building electronics assemblies with DCA (Direct Chip Attach - bare die onto PCB) and wire bonding? - What Die Bonder/Dispensing Machines are recommended? - What brand conductive epoxy were used to attach die?
Electronics Forum | Wed Oct 13 12:12:20 EDT 2004 | haviland
Good morning. We have a used Nordson Coater, Batch type (not pass thru), w/o cure oven,that you can purchase for $9,950.00. Unit has been cleaned and lines purged. It was running when decommissioned, and is still in nice shape. Thanks, Nick Haviland.
Electronics Forum | Fri Aug 30 16:20:04 EDT 2019 | valentink
Hi Rob, if still have problem chek this: https://smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=22207&mc=1&CFID=341514067&CFTOKEN=53786128a950f045-9CA44677-99B5-B63D-DCF63C377990E39E Valentin
Electronics Forum | Tue Apr 18 08:05:00 EDT 2000 | Wister
Hi, I got an interesting result after completing DOE that more open defects occurred higher the viscosity.The ppm would be 500 while the viscosity is 950 and it would be 1500 while the viscosity is 1050.The range of viscosity is 900 ~ 1100kcps. The p
