Electronics Forum | Tue Apr 17 12:58:50 EDT 2007 | Cmiller
This guy has treated us pretty well, the automatic stuff is EXPENSIVE though. Ira S. Schafer, Manix Mfg., Inc. E-mail: sales@manixmfg.com Web Site: http://www.manixmfg.com Address: 1650 Loretta Avenue Feasterville, PA 19053 United States of Americ
Electronics Forum | Sun Jan 24 14:01:56 EST 1999 | Daniel
| I'm currently planning to do an evaluation of RMA flux solder pastes for mil type applications. Does anyone have any suggestions for vendors to try? I'm especailly interested in pastes that aid application on boards with 20 mil pitch. | "KOKI 95
Electronics Forum | Mon Mar 27 19:29:14 EST 2000 | Garo Donabedian
I ran six boards with uBGA, and all six have voids 25-30%. I would like to know what would cause this since this is my first time running into this problem. also I would like to know how does a void effect the components function the customer does no
Electronics Forum | Mon Mar 27 20:59:41 EST 2000 | Dave F
Garo: Voids are primarily process indicators. There is experimental evidence that voids retard crack propagation locally around the void on a temporary basis. There is no standard, IPC or otherwise, on voids--nor should there be. See also J-STD-013,
Electronics Forum | Wed Mar 29 09:39:45 EST 2000 | JAX
Garo, Minor voiding in Ball Grid Array solder joints is common, and not considered a threat to reliability. The biggest cause of open solder joints caused by voids is the outgassing of moisture. They are formed when pockets of gas are trapped durin
Electronics Forum | Tue Aug 31 10:45:53 EDT 1999 | Dave F
| Need info on ABW Relow Oven such as manuals, software or contact info technical support. | | Thanks! | Lee: ABW became cash poor and went goooosh!!! about 5 years ago. Manix Manufacturing holds the ABW design rights, manufactures and markets "
Electronics Forum | Tue Apr 06 20:28:41 EDT 1999 | Scott McKee
| I need help in finding solder paste measuring equipment. | Height, length, width, area, volume after printing (off line): 1. Cyberoptics:1-800-745-6315 www.cyberoptics.com 2. Manix Manufacturing 1-215-953-9797 3. Theta Group 1-205-650-0535 4.
Electronics Forum | Thu May 07 11:39:29 EDT 1998 | Dave F
| Is there a machine for bending S shaped bends in leads | of through-hole components, to keep them off the surface of the board. Ryan: Some lead forming equipment can form leads to stand-off the board. Some lead forming equipment suppliers are: Au
Electronics Forum | Thu Aug 10 12:14:12 EDT 2000 | Charles
It looks like a giant dpak device but with 5 leads. The problem is that on approx 3% of our boards one more pins are open circuit. It appears that the pins are not in contact with the pads. Board is HASL finish IR oven Paste Koki 953i. If you have a
Electronics Forum | Tue Apr 17 19:58:49 EDT 2007 | davef
Equipment||Lead Forming||Olamef||||619.792.7328 fax 1966 ?? Equipment||Lead Forming||RotoForm||||423.266.0067 fax 0105 Equipment||Lead Forming||Streckfuss||||214.790.1614 fax 986.1148 rep Foundation Technologies Equipment||Lead Forming||TED/Heller|||
winsouce.jpg)
