Electronics Forum | Tue Nov 26 11:29:19 EST 2013 | joeherz
Patrick, Thanks for the reply and well said. Joe
Electronics Forum | Tue Nov 26 11:53:16 EST 2013 | joeherz
OK. Now I understand. The FREE's cancel each other out.
Electronics Forum | Tue Nov 26 11:20:30 EST 2013 | patrickbruneel
Any alcohol based flux will outperform a water based (VOC free) flux. If one thing I learned in my 35+ years in the electronics industry "Water and electronics is a bad combination". Patrick
Electronics Forum | Tue Nov 26 11:40:50 EST 2013 | patrickbruneel
Joe, And lead FREE in combination with voc FREE is a cocktail for disaster. And it surely ain't FREE (if you know what I mean):-).
Electronics Forum | Sat Nov 23 12:39:18 EST 2013 | joeherz
We installed a Soltec Delta 3 a few months ago and have been trying to run with a VOC free no clean. We're using SN100C in the pot. We are spraying the material and have top/bottom preheat. Evaporation of the water in the flux is a bit of a stru
Electronics Forum | Fri Sep 30 07:15:17 EDT 2011 | deanm
We are using Kester 985M in our Pillarhouse Jade. We only run SnPb, but this is a newer formulation of flux that is suitable for both lead and lead free alloys. Call the manufacturer of your selective soldering machine and get their advice. They ty
Electronics Forum | Thu Dec 06 12:37:14 EST 2012 | deanm
We are having difficulty with bridging on a 2x50 pin 0.050" fine pitch connector using our selective soldering machine. It usually bridges at the end of the row, but sometimes it bridges all the pins together as it drags across (solid bridging). I
| 1 |
winsouce.jpg)
