Electronics Forum | Sun Sep 17 22:50:20 EDT 2000 | Sartor
I am looking for a solution for gold finger cleaning and repairing.Can anyone recommend good solution(s)?Also,can anyone recommend a good flux paste source(s)?Thanks.
Electronics Forum | Sun Feb 15 17:32:08 EST 2004 | brian bennett
i have always found any of the alcohol based solvents good.here in the uk we use the alpha make.with screen auto wipes i found the set up to be most important.i.e how many pcb's printed before wiping.i found running pcbs with bga and .50 pitch compo
Electronics Forum | Sat Aug 03 05:05:08 EDT 2024 | ttheis
We have also had pretty good luck with DEK second hand.
Electronics Forum | Wed Jul 31 13:04:58 EDT 2024 | mistrthou
I can't speak for the others, but we have a pair of DEK's. They do a good job for us. The tech that came out to do a PM for us (we got them both second hand and wanted a thorough checkup) was very knowledgable as well.
Electronics Forum | Wed Aug 14 07:38:57 EDT 2024 | zsoden
$23K USD for a very good condition, low hours 2016 model. Very similar to what I was being quoted for similar vintage Deks.
Electronics Forum | Wed Jul 31 06:42:11 EDT 2024 | oxygensmd
DEK is quite popular and getten replacement parts is easy in Asia. At this time we have EKRA which is really good for operators (I think, EKRA have the best GUI) and the mechanical design is much simplier as DEK designed. If I were you I will check s
Electronics Forum | Wed Aug 14 06:52:56 EDT 2024 | zsoden
Thanks mate, that's really interesting insight. Despite the suggestions for other options shared here I have just purchased a Yamaha YCP10. Yes, it's a deep machine but the width is compact compared to the other options, so it should fit nicely in o
Electronics Forum | Mon Aug 05 08:09:35 EDT 2024 | ginny
Hello, Sir; My name is Ginny from Scansmt in China. I have 2 units of secondhand MPM momentum BTB for sale. if your space is not that enough, you can choose this one under your considerations.You were said, you are using MPM up2000,so I think you ar
Electronics Forum | Tue Jul 30 22:11:09 EDT 2024 | zsoden
We've been running a trusty MPM UP2000 printer for a few years now but the 30 year old technology is starting to struggle a bit. It didn't come with snuggers and the vacuum hold down just doesn't cut it for some of the finer pitch stuff we're now doi
Electronics Forum | Tue Jul 28 07:02:59 EDT 1998 | smd
Right now we are taping the goldfingers which is effective but also expensive. Also, some tape was leaving yellow marks on the goldfingers. We're trying the so-called goldfinger glove from Steven's Products. It's a very small company (probably one gu
