Electronics Forum | Tue Apr 01 16:14:37 EDT 2014 | emeto
Hello, I have newer generation machine(MV-7) and in my software I can open two programs at the same time. After you do that there is a button in the software saying T/B. when you press this button it will run board1(or top side) and right after you
Electronics Forum | Mon Aug 18 16:54:46 EDT 2008 | jlawson
Great to see running. The Vision Monitor Video comes from the Vision Processor Card, including overlay info, grids etc depending on mode you are in, like teaching etc Why is is on still I can not say, could be software version, there was several ve
Electronics Forum | Mon Dec 02 10:33:46 EST 2013 | sarivong0914
Hello all, We have a Samsung CP45FV Neo, and I'm having problems with the operating software. I have a PCB with 2 different rev's. Rev. A boards was programmed to run Vertical. Then Rev.B boards are horizontal but was programmed to run vertical.
Electronics Forum | Tue Jul 04 20:31:21 EDT 2017 | davef
If you want in, 5-21h Bottom Termination Components (BTC) Task Group is in "Working Draft" revision from "A" to "B" of IPC-7093 - Design and Assembly Process Implementation for Bottom Termination SMT Components
Electronics Forum | Tue Sep 09 09:25:29 EDT 2003 | james
What about making the customer drawing or parts > list with their rev as a part number on your > parts list? Example: (455556 rev X) would be a > part number on your parts list. What about keeping their revision as A, B, C and in your system it
Electronics Forum | Thu May 09 07:19:16 EDT 2013 | hussman
There is a rev B out now.
Electronics Forum | Fri Jun 30 12:21:34 EDT 2017 | davef
James: For IPC Status of Standardization, look here: http://www.ipc.org/Status.aspx dwf: A-610G Final is out for public comment, look here: https://ipc.kavi.com/higherlogic/ws/public/workgroup?wg_abbrev=7-31B
Electronics Forum | Wed Apr 15 20:49:12 EDT 2009 | davef
SOP-4-DFM01-B Rev H * Daan Terstegge's excellent jump site http://www.smtinfo.net/Db/_DFM.html
Electronics Forum | Mon Jun 19 19:08:21 EDT 2000 | Brian W.
IPC-610 Rev B: Paragraph 4.1 (page 52), As an exception to fil requirements on Table 4-1 on thermal heat sink planes plated through holes, a 50% vertical fill of solder is permitted, but with solder extending 360 degrees around the lead with 100% wet
Electronics Forum | Sat May 27 08:58:07 EDT 2000 | Thanas
Hi, I'm new in SMT & confusing to define the soldering defect criteria of cold solder, dry joint & dewetting. & what's the root cause for them ? FYI, I had read the IPC-A-610 rev. B , but doesn't help much. Any advise is very much appreciate. Thanks
