Electronics Forum | Sun Oct 21 22:05:01 EDT 2018 | srini1904
Hello, We have Dek 248 Icon i2 semi auto screen printer. This machine was not in use for long time and Bios battery was dead. We replaced Bios battery and now date are correct. Issue is its not communicating to control board. Suspecting Bios setti
Electronics Forum | Wed Apr 26 18:35:07 EDT 2023 | poly
I'm looking to make a board support table fixture that is connected to the printer and uses the vacuum manifold of the printer. Printer is an mpm Accela
Electronics Forum | Fri Sep 17 11:16:58 EDT 1999 | Rob Moats
HI everyone, We are using a Siemens ap-25 screen printer, in the past we have not had any problems with adhesive placement until a couple of weeks ago. It seems the x axis has decided that it should be set somewhere between .00085 and .00150. No
Electronics Forum | Tue Apr 27 14:54:26 EDT 2004 | Kirk
reduction apertures in stencil and question how find center?. I thought that vision start playing important role at the beginning for the first PCB, help set precisely printing process. You gave tip to work without Mylar. Ok but again how you set ste
Electronics Forum | Fri Feb 13 04:09:52 EST 2004 | patthemack
New update: By playing around with some settings in the software, we've been able to get the z-axis to work. This makes me think that if we reload the software, the problem may be fixed. Got any ideas as to where I can get a copy of the MPC-29 softwa
Electronics Forum | Tue Aug 16 19:19:55 EDT 2011 | rsikora
I had a look at the Ekra printer at a local industry show last year. It seems to be a solid machine. Their current customers that I visited were extremely satisfied w/ the machine and with Ekra's technical support (Location = In the USA). The pcb
Electronics Forum | Fri May 09 14:56:37 EDT 2008 | markhoch
The paste dispensers work well as long as the humidity in your shop is properly controlled. If it gets too humid, and the paste gets "soupy", then it will take less air pressure to dispense it onto the stencil. Paste dispensers use a controlled, pre-
Electronics Forum | Mon Apr 26 15:04:14 EDT 2004 | pjc
You are correct in understanding that the vision system comes into play for subsequent boards- to align them. Yes- if you missalign the first board and set the cameras to that board, all subsequet boards will not be aligned. Mylar is a thin polyester
Electronics Forum | Fri Feb 06 15:52:18 EST 2004 | pjc
SPM is superior in terms of technology and application. SPM has larger print area, up to 20� x 19", vs. 17.7� x 15.7� for the MicroFlex. MicroFlex is microprocessor controlled while the SPM has a PC. SPM can print down to 12mil (0.3mm) fine pitch no
Electronics Forum | Mon May 13 09:45:39 EDT 2019 | spoiltforchoice
Interesting, I've not had a hands on with either Hawkeye or Ppeedprint SPI, however I was under the impression that speedprint printers give you an awful lot of printer for your money, comparing quite favorably with Asian brands with strong feature s
winsouce.jpg)