Electronics Forum | Fri Mar 22 14:07:00 EDT 2019 | proceng1
I believe that NORDSON now recommends AIM NC277. Nordson bought out ACE-protech.
Electronics Forum | Tue Jan 24 15:58:04 EST 2023 | proceng1
I have been involved with our Selective Soldering process for 15 years or more. Using ACE Protech machines and now a Juki. Our first ACE machine replaced 4 hand solder operators easily, allowing them to work on other projects. The machine isn't "set
Electronics Forum | Wed Mar 28 08:45:03 EDT 2007 | pjc
I have seen point-to-point soldering iron tip robots in action at a number of factories. The problem is repeatability at delivering good solder joints. Consider a small selective solder machine, the nozzle type: www.ace-protech.com www.air-vac-eng.c
Electronics Forum | Thu Oct 15 18:31:32 EDT 2009 | swag
You should take a look at these guys, also: www.ace-protech.com We have one of their machines and its been great.
Electronics Forum | Thu Oct 11 09:44:27 EDT 2007 | 18424
Hey, Check out Ace/Protech for selective soldering. www.ace-protech.com
Electronics Forum | Tue Sep 12 21:35:27 EDT 2006 | davef
Captain: Spare me: http://www.ace-protech.com/
Electronics Forum | Thu Nov 12 14:10:46 EST 2015 | proceng1
Mach3 is a CNC software used by ACE-Protech to run their Selective Solder machines, I don't know what a jog pendant is, unless it's like a wired remote for moving the axis.
Electronics Forum | Tue Nov 06 09:31:31 EST 2012 | swag
We also have 2 ACE machines. Great machines, good support. Keep them clean and do the maintenance on the solder pots and pumps and you'll have no issues.
Electronics Forum | Thu Jun 21 16:30:47 EDT 2012 | grauen06
We are currently using an ACE K.I.S.S. 104. We used SN100 solder with AIM NC265 flux (no clean, alcohol-based). Also, we use topside preheat at 100 degrees C and a 6mm nozzle (as big as we can go with this application). The PCB has a matte finish as
