Electronics Forum | Wed Feb 19 06:16:53 EST 2014 | cunningham
Yeh due to the solvents in the coatings im guessing there is a health and safety risk. Solvent stripping is a lengthy process for the coatings we use and usually means submerging the whole board so not local to the rework. We have a booth with ioni
Electronics Forum | Mon Nov 27 17:29:13 EST 2000 | Dave F
Contact: Graham Naisbitt
Electronics Forum | Tue Feb 18 11:47:50 EST 2014 | rgduval
Is there a reason you're considering bead-blasting the conformal coating? It seems like a bit of overkill. Most of the cc that I've used over the years either has a solvent that will dissolve it, or will dissolve with heat. Heat has been our go-to
Electronics Forum | Fri Aug 14 09:40:59 EDT 2015 | jvalverde
Hello, I want to make a simple conformal coating machine, I think in a Cartesian robot with MACH3 software. My questions are about the G-Code for the program (the software to design: % open/close nozzle, the paths (trajectory), import the pcb fi
Electronics Forum | Wed Feb 23 22:38:28 EST 2005 | davef
We: * Cure 1B73 according to spec in a heat box, like a Blue-M * Clean nozzles [one set in use, one set being cleaned] in thinner in a bronson ultrasonic cleaner * Haven't evaluated coatings in years, but would do it according to J-STD-001C, Reqmnts
Electronics Forum | Thu Aug 27 10:12:07 EDT 2015 | fcmtechnician
Hi buy a manufactured machine! is not hard to build one, but the know how after you build it is the key point for you! Are you able to build and control the applicator to coat your board? are also some Budget machine on this area, look for Dima, Ca
Electronics Forum | Wed May 16 08:48:14 EDT 2018 | charliedci
Looking for anyone that is familiar with Assymtek coating, 2004 model C-718, running on Windows NT. We experienced the blue screen of death (cannot find dll), had IT recover programming, install another hard drive in PC but now manual control of disp
Electronics Forum | Tue Jun 22 22:18:02 EDT 1999 | armin
Hi Graham, can u send me some conformal coating guidelines. i'm also interested ! my e-mail add is armin.tan@setec.com.au thanks | | Could anyone please give me any information or obtainable references concerning proper guidelines for the applica
Electronics Forum | Thu Feb 17 15:01:23 EST 2005 | davef
We're not familiar with your DYMAX #984-LVUF. The problem is not with your conformal coating. The problem is with your 0805 [and not all of 0805, probably just those from a specific supplier]. This lack of coverage of components is called dewetting
Electronics Forum | Tue Jun 15 10:58:06 EDT 1999 | Ken Lester
| Could anyone please give me any information or obtainable references concerning proper guidelines for the application of conformal coatings (double comp.type) using both methods of spraying and dipping. Information must also include best instrument