Electronics Forum | Wed Jul 29 10:27:01 EDT 2015 | risorse_new
Goodmornin I have a problem with the fixing and move cameras, i don't see the image of the cameras on the screen. On the monitor i see the cross and letter, but i can no see on the black box the camera images. I know the problem is on the ADDA Board.
Electronics Forum | Sun Dec 28 19:13:03 EST 2014 | kahrpr
Its been a long time but a CP40 will not run under XP its win 95 or win98 only and I believe it can only use the original style mother board.
Electronics Forum | Sun Sep 23 19:05:04 EDT 2007 | darby
Floyd, Purchase a spare set of motherboards, get the numbers from the boards and google them up. The CP-40 motherboard is getting on now so you should pick up new ones very cheap. Also don't forget to check the battery on the motherboard.
Electronics Forum | Mon Sep 17 11:07:45 EDT 2007 | floydf
We had the mother board in a Samsung CP40 stop booting up. We have since fixed that (reseated the cpu). I tried putting a pc in place of the mother board. I loaded the program, and plugged the bus line that commuinicates to the machine in the pci slo
Electronics Forum | Fri Dec 17 09:04:17 EST 2010 | wolverine
We have an older model CP40-LV that will start out the day with blurry and double vision, then after about twenty minutes of just idling, the vision slowly improved until the machine could find the board fiducials and do a passable placement job. Th
Electronics Forum | Thu Jun 01 16:46:40 EDT 2023 | assuredtech
We have the following Samsung CP20 spare parts and feeders available, we also have CP40 - CP45 spare parts and feeders available - please inquire. 1.) Fine Suntronix MRK OR4-H Power Supply 24V 16 Amp Output 2.) Y Axis Service AmplifierSanyo Denki PY0
Electronics Forum | Wed May 21 15:13:56 EDT 2014 | wendynguyen234
Sarason, thank you very much for your support. There is an ISA interface board with just ribbon cable from window 95 PC to VME I/O DPRAM ver. 2 board in the same VME rack that has MVME-162-110 (CPU board), DSP, ADDA, AXIS & CONT boards. Do you think
Electronics Forum | Wed Mar 28 07:02:41 EDT 2012 | JB
Brad. We have swapped the PC since the fault as we did have an old PC board lying around. I have tried the ISA card from the other working machine and that doesn't work either. Think its time to get in some help.
Electronics Forum | Thu Jan 21 07:03:43 EST 2016 | anel_elektronik
I have it: "Inline Before Input" have to be closed. Conveyor Board CP35. Greetings
Electronics Forum | Tue Mar 27 15:49:54 EDT 2012 | bradlanger
Try Re-seating the card that connects the ISA slot from the computer mother board to the I/O Dpram card. It may be worth checking the ISA card for bad solder joints. The computer mother board could be going bad. Check for vented electrolytic caps. Ho
winsouce.jpg)
