Electronics Forum | Sat Dec 16 09:42:41 EST 2006 | Frank
Hi all, Having been designing (3d modelling and programming) stencils and tooling (solderwave carriers,print support etc) for several years I am now investigating whether it would be possible to do this from home. I live in the UK and am therefo
Electronics Forum | Thu Aug 09 16:51:39 EDT 2018 | tey422
A good set of fixtures are what you need to get it done right. Since we are in the same area, I would recommend give ATD (Advance Tooling Design)a try, they located in San Jose. We been using fixtures from them for years. We build thousands of Fle
Electronics Forum | Wed Sep 19 13:43:49 EDT 2001 | jschake
I cannot report having experience with 0201 printing applications on flex circuits. Generally, I would be concerned with handling of the flex substrate. A carefully designed vacuum capable custom tooling fixture would likely be required to ensure p
Electronics Forum | Wed Oct 31 12:24:21 EST 2001 | Stephen Zhou
We are designing the SM fixture for small PCB, does anybody know where we can get the spring holder which can hold the PCB to the fixture? Who is the manufacture for this part? Thanks in advance. Stephen
Electronics Forum | Mon Jul 30 10:44:37 EDT 2001 | hinerman
A few of the more common defects If bridging or insuffienct deposits occur on the printer, one of the first things to check is the tooling. Misplaced hard tooling pins or poorly designed fixtures have a nasty habit of breaking components on side
Electronics Forum | Tue Mar 05 11:08:31 EST 2019 | mrk
Hi all, We have an assembly which features non-plated tooling holes used to align the board in a bed of nails style test fixture. This assembly is rather small, and as such, the test points are pretty small as well. We have found that some variation
Electronics Forum | Wed Mar 10 21:55:57 EST 2004 | Dreamsniper
Has anybody here could provide me good infos regarding BGA rework Kits other than the Flextac Stencil. Also on what sort of fixtures and toolings they provide to help me align the rework stencil onto the BGA pads. Thanks in advance... Hi to Dave F.
Electronics Forum | Wed Nov 20 16:27:15 EST 2002 | pjc
FYI: MPM does in fact offer alternate board support tooling than the vacuum box system. They have the X and Y snugger tooling, which clamps the board and uses magnetic support pins. If you are looking at a used UP2000, check to see what tooling it ha
Electronics Forum | Tue Jul 08 12:21:42 EDT 2008 | jwasyliw
Biggest differnce is tooling. Tooling cost with > a fixed pot - no tooling cost with programable > "moving"pot. > > There are various way to control > peel off with a moving pot. Depending on the > machine, you can use either the Z axis or the
Electronics Forum | Thu Aug 19 05:12:41 EDT 2004 | bernardmulcahy
Hi Russ, Thanks for the reply -- It is not a double sided board so I guess I will be doing pretty much the same process as you described. I was wondering about was the tool you mentioned -- Is this just a fixture you got made locally or some specific