Electronics Forum | Fri Dec 28 13:01:24 EST 2012 | emeto
I assume your problem is comming from the carrier. If it is so: 1. use carrier from another ,aterial 2. Use solder paste that handles faster profile Good luck!
Electronics Forum | Fri Dec 28 13:01:46 EST 2012 | emeto
I assume your problem is comming from the carrier. If it is so: 1. use carrier from another material 2. Use solder paste that handles faster profile Good luck!
Electronics Forum | Thu Mar 04 22:52:57 EST 2004 | Roberto Rodriguez
i have a Universal GSM2 machine down and we check all, but are exaust, the problem is the next, when we make Zero axis tha machine say "AXIS HEAD1 Z POSITION ERROR DURING MOVE RELATIVE COMMAND" AND "TIME UP SPINDLES UP". DO YOU HAVE EXPERIENCIES AT T
Electronics Forum | Sat Nov 14 05:36:14 EST 1998 | Mattias
If there is anyone who has experience of the new Panasonic MPA-V2, please let me know about known problems and strenghts with this machine.
Electronics Forum | Wed Sep 10 17:08:08 EDT 2008 | slthomas
Isn't that the non-eutectic one that provides the pasty phase range that people use to clobber their tombstoning problems?
Electronics Forum | Mon Oct 13 18:15:38 EDT 2014 | ilavu
Hey rob, make sure you do the changer setup. That procedure looks at the fiducials on the changer and adjust the position for nozzle change. It is in system setting. Motor or amp is not easily go bad. I have machine from 92 and never had problem with
Electronics Forum | Tue Oct 14 15:40:29 EDT 2014 | comatose
The axis drive cards can be swapped, so if you switch the second and third in the VME, and the problem moves to another axis, there's your answer.
Electronics Forum | Wed Sep 10 17:21:08 EDT 2008 | gregoryyork
Strange we use the 179~C eutectic 62/36/2 solder paste as standard in Europe. It is indeed 2% Ag in fact we dont sell 63/37 paste or very rarely. I think if you mix a little 60/40 powder with the 2% Ag alloy this overcomes the tombstoning problem.
Electronics Forum | Thu Oct 23 04:30:24 EDT 2014 | garteaga
Hi Rob, We have a GSM2. We have had that error in several occasions. Assuming you have already verified your vaccuum is good for that spindle, the most common problem is that the machine configuartion is wrong. Match the nozzle on the head to the no
Electronics Forum | Tue Feb 09 10:34:53 EST 2021 | jamesn
Hello Gents I have a problem with the head on gantry 2. I think it needs replacing but in the meantime Can anyone on the forum tell me how to disable it so the machine will initialise and run gantry 1 Ive been told it can be done but they cant rememb
winsouce.jpg)
.gif)
