Electronics Forum | Tue Nov 28 21:03:48 EST 2000 | Dave F
Getting people to stop sounds like a good idea, but once they get running after a lengthy set-up, you can sort of understand why they don't want to stop when they quickly run out of paste after emptying a partially filled tube. Beyond the paste qual
Electronics Forum | Fri Jan 23 11:27:45 EST 2015 | charliedci
Per our selective solder provider, they recommend a PSA type generator to supply the needed 99.999% pure N2. The membrane type (which we have) does not provide the minimum (99.995%) purity necessary for lead free wave soldering. They happen to sell P
Electronics Forum | Wed Oct 30 16:05:08 EST 2002 | msimkin
Hi, I have received a report form a board supplier, analysing the reuslts form non wetting problems we have been expereincing with their boards. I assumed it was due to the gold layer being too thin, thus allowing the nicklel layer to be exposed and
Electronics Forum | Fri Sep 20 19:06:09 EDT 2002 | mjabure
The way it works is the first index is done with the feed cylinder, and the final is done using the cam during pick. You might want to check to make sure you're getting a full, complete stroke out of your feed cylinder, also make sure the mechanism
Electronics Forum | Thu Feb 18 15:25:13 EST 2010 | spitkis2
An air temperature tolerance of +/- 3 deg C along a 200mm width would not play a significant role on the board's temperature due to its thermal mass. However if the air temperature varies by 10C along the conveyers width, I can see how a 5 degree va
Electronics Forum | Wed Aug 31 14:45:35 EDT 2011 | ryanr
Non-Hermetically sealed parts are parts are not air tight and gasses and liquids will pass into the package of the part and come in contact with the electrical or other components within the package (i.e. some switches, relays, transformers, etc.) D
Electronics Forum | Mon Nov 27 19:32:02 EST 2000 | Michael Parker
Prof. Whoopee - amazing facts that you find on your 3-D BB, it has completely confounded my comrade, Chumley. Plainly spoken that around the SF Bay Area a.k.a. Silicon Valley(ever hear of the famous SF Fog?)during the winter months, near the coast a
Electronics Forum | Tue Nov 28 18:10:13 EST 2000 | Michael Parker
Norman- I would be pushing to get the real world to match the ideal world, in other words get your jobsetters to do the right thing. You are looking to incur more costs to justify not having to make people do their job right. A bit of training a
Electronics Forum | Sat Jul 11 03:01:29 EDT 2020 | researchmfg
The bubble inside BGA ball locate at via in pad and apply the resin plug hole.You shall check the cooper plating quality on PCB pad. If there is thin plating or broken on the pad then air will come from the resin plugged via and be trapped inside the
Electronics Forum | Wed Nov 17 09:51:25 EST 2004 | AS
I'm looking for advise on setting up a prototype station for smt (we are currently outsourcing smt production, but have a need for rapid in house prototyping). The station must be able to handle only single sided boards with components no smaller th