Electronics Forum | Thu Feb 27 16:23:37 EST 2020 | dwl
http://www.circuitnet.com/news/uploads/3/Comparing-Soldering-Results-of-ENIG-and-EPIG-Post-Steam-Exposure.pdf Years ago, I battled this problem. ENIG PCBs reflowed with active WS flux. We built one side, and then washed them because they were going
Electronics Forum | Thu Sep 20 01:13:05 EDT 2001 | Michael Konrad
Hi Dave, It may be. DI water alone will not build up residue. It can attack the finish of electro-polished (mirrored) stainless steel though. I have seen a white / chalky buildup on poly inline cleaners, usually isolated in the wash section. The
Electronics Forum | Fri Feb 15 13:24:44 EST 2002 | Mike Konrad
Hi Dave, To close-loop or not to close-loop, that is the question� I can not speak for all machines, but in our case, close-loop systems are actually less costly to operate than open-loop systems (we make both). First, determine the volume of wate
Electronics Forum | Tue Feb 01 12:02:56 EST 2000 | Mike Konrad
Your question may be answered in two parts. First, if you are using a water soluble (OA) paste, then water is an excellent �solvent�. Water, in one way or another, is used to clean all fluxes and pastes from PCB�s. In some cases, a chemical is add
Electronics Forum | Fri Apr 23 11:33:56 EDT 2004 | Ron Herbert
Dreamy, Adding chemistry to the wash section in a cleaner does have its advantages. It reduces the surface tension of the liquid and will remove contaminates such as fingerprints. It does however complicate the process in respect to water treatment
Electronics Forum | Fri Oct 17 17:00:20 EDT 2003 | russ
Most batch cleaners are "dishwashers" with stainless steel pipes and cabinets. Heated DI water is a good thing. Are you cleaning Watersolubles or no-cleans? You will need some chemistries for the No-Clean and the W.S. will eventually eat through al
Electronics Forum | Fri Nov 24 10:03:08 EST 2006 | slthomas
"The fluid sometimes heats up to 105 deg F." Not sure what you mean here...is it set at 105 but rarely gets there, or is your temperature dependant upon another process to heat it up? Also, what temp is your rinse water? We used to use a U/S clean
Electronics Forum | Mon Apr 22 16:55:42 EDT 2002 | russ
Greetings All, Anybody out there experiencing white residues after cleaning? We currently use a batch cleaner to clean water soluble fluxes. this cleaner makes its own DI water by means of carbon and resin tanks. After cleaning there are residues
Electronics Forum | Tue Dec 08 16:53:41 EST 1998 | Ryan Jennens
Hey there Dave! We used to use a batch cleaner when we used water-clean paste. It was similar to a dishwasher, except that it had a digital menu for entering the number of wash cycles, water temp., amount of saponifier (we just used DI water),
Electronics Forum | Fri Oct 17 16:54:50 EDT 2003 | gpaelmo
We have a need to clean boards. Can we use a regular dishwasher if we feed it with DI water thru a water heater? What kind of issues can come up with doing it this way as opposed to an industrial type batch cleaner? Any thoughts or comment would be a