Electronics Forum | Fri Apr 13 12:24:07 EDT 2007 | teamcanada
We assemble for a customer that is having an inconsistent low level analog interference we believe with the no clean flux residue from Alphas OM5100 solder paste. We are considering testing Amtechs 4300 water washable no clean paste. We will test bot
Electronics Forum | Fri Apr 13 15:42:18 EDT 2007 | flipit
This is sort of interesting. We had a clock problem with Alpha OM-338 lead free paste. The flux residue was causing a clock problem and the clock was only a few KHz. We went back ot OM-5100 lead paste and the problem never occurred again. Chris
Electronics Forum | Wed Feb 24 11:28:09 EST 2010 | vleasher
I apologize for being so vague. It is a standard leaded process using ALPHA OM-5100 for the SMT. So would a reduction in wash temp result in less white residue?
Electronics Forum | Wed Apr 27 09:15:30 EDT 2005 | russ
You will probably need to change paste. If I remember correctly the SMQ92J has a post reflow residue of 40%. This is one of the highest post reflow residue levels available. PIH uses a lot of paste which means a lot of flux residue. There are othe
Electronics Forum | Wed Oct 04 16:24:48 EDT 2006 | russ
try Alpha OM5100 this is a noclean paste that we use and have done the same thing you are now, reflowing pbfree with pb paste, we run to max temp of 230C with this paste and use a straight ramp with no soak profile is about 4 mins long from ambiant
Electronics Forum | Wed Mar 02 08:53:58 EST 2005 | jdengler
I like Alpha Metals OM-5100. Very long stencil life with good results. Jerry
Electronics Forum | Fri Apr 13 17:11:12 EDT 2007 | jmelson
Even though this is a "no clean" flux, are you (or the customer) cleaning the boards? If this is truly a low signal level device, there is no way you will get away without cleaning the flux residue. I do a lot of low-level hardware, and we have to
Electronics Forum | Mon Oct 20 11:44:41 EDT 2008 | jdumont
Good morning all, we have been having some random intermittent connections on some BGAs lately on ENIG finished boards. Can you take a quick look at this picture (link) and let me know if it looks like a possible black pad occurrence? The picture sh
Electronics Forum | Wed Dec 15 08:15:10 EST 2004 | pjc
UP78 is an old product. Data sheets are no longer posted on the web site. OM-5100 is the replacement. Try calling tech support and they should e-mail you the UP78 data sheet that will show the profile curve. Jersey City, NJ Tel: 201-434-6778 http://
| 1 |
.gif)