Electronics Forum | Tue Jan 03 13:34:08 EST 2023 | dontfeedphils
Just to add some more caveats, the rate at which the paste leaves the tube will also be dependent on the (somewhat) fluctuating variables of temp and humidity. This is why a height measurement of the paste roll on the screen works better.
Electronics Forum | Wed Jan 04 03:08:12 EST 2023 | msirifat
Hello Stephen, thanks for the advice. We are producing LED TVs & we have a facility for SMT and manual insertion. We are also thinking of changing the board finish from OSP (due to its shorter shelf life) to ENIG/Immersion Tin.
Electronics Forum | Thu Jan 05 01:57:37 EST 2023 | SMTA-71403260
Hi We've bought a Wave with a fluxer missing. Can you please share your thoughts and ideas what would be the best(and also relatively chip) way to update Wave with a fluxer? Any third party solutions that we could install and control independently.
Electronics Forum | Mon Jan 09 12:41:31 EST 2023 | proceng1
Magyart is on the right track. Lots of variables. Can you post a photo of the skewed part? But also, is it skewed in the paste before reflow? How many inductors are doing this per board? Lastly, indicate on the photo the direction of travel in the
Electronics Forum | Tue Jan 10 19:02:55 EST 2023 | crystalw4280
Okay that makes sense actually. I was under that impression anyways but just wanted some verification from other people and places. Yeah then also are not all jukey nozzles. Working on trying to get some juicy approved at least or authentic if the pr
Electronics Forum | Fri Jan 27 11:44:08 EST 2023 | poly
I'm now looking at Juki / Inertec and Ebso. I can get a used Ubso locally which would be very easy to deal with and they are also the dealer for Inertec / Juki. They will be around the same place but the Ebso will be refurbished and come with some wa
Electronics Forum | Thu Feb 09 11:13:59 EST 2023 | sandima
Also didnt understand the jump from the 6th pin of the 2nd connector on the right side.
Electronics Forum | Fri Feb 10 12:21:20 EST 2023 | youngbuck
Also, tried swapping the Servo card. X7 which is the Rising table servo motor card, swapped with X8,9,10 which are all the same and same result.
Electronics Forum | Wed Mar 01 15:04:05 EST 2023 | kirill
Well, I checked everything, also spoke with chinese guys, they just make a 1 side program, move it to the machine by usb or on the network, and just run it. They are light years away from Siemens Siplace Pro.
Electronics Forum | Sun Mar 05 13:56:43 EST 2023 | kirill
What you're using is IS - Intelligent solutions... What I have is - JaNets I also have it in my program, but its not working.
