Electronics Forum | Thu Jan 24 13:43:20 EST 2008 | operator
I am a SMT Process Engineer and I make $18.85/hour. I think that is low considering I just turned down a job in Houston that was offering me over 50K for the same position with less reponsibilities. It just comes down to what company you work for and
Electronics Forum | Mon Jan 28 10:12:05 EST 2008 | dyoungquist
I am the manufacturing engineer for a small electronic OEM who also provides EMS for other local electronics companies. We are located in Montana (USA). In 2007 I made 36K. While that seems low, remember that my commute to work is only 10-15 min a
Electronics Forum | Tue Feb 05 18:26:34 EST 2008 | janz
Hello, We have FCM base 2 machine (Philips-Assembelon). I am trying to find out whether it is possible to install instead vacuum pump (make noise and power consumption) venturi system. Does anyone try to do this.? What was the result.? What vent
Electronics Forum | Fri Feb 08 03:54:37 EST 2008 | muarty
I would think that you could quite easily use 0.6mm I/D nozzles even when using a hand syringe. As you say you are only using this for larger devices to prevent them from falling off. I am sure there are very reasonably priced small compressed air un
Electronics Forum | Thu Feb 14 00:05:50 EST 2008 | keithej2
Anyone ever seen an X1 encoder alarm on an IP3? We get it soon after power up and the x1 axis never locks. We have a motor/encoder on order but I've never seen this error message and am not positive that will fix it.
Electronics Forum | Wed Feb 20 21:23:38 EST 2008 | daxman
you can purchase a license from Fuji to be able to directly import CAD data. It's the fastest and most accurate way that I am aware of. Also, it gives you the option to import the board outline as well as layers of the CAD so that you can see the s
Electronics Forum | Mon Mar 03 02:11:35 EST 2008 | andrzej
I am working on instruction for potential customer about PCB design guidelines to make it easy for wave soldering (not selective). I have experience and have already gathered some info but I still need exact information about dimensions and distances
Electronics Forum | Mon Mar 17 13:34:05 EDT 2008 | cyber_wolf
I have never heard of this being done. The limitation is the camera. Also, I am not aware of anyone making CP4 nozzles for 0201's. If you want a Fuji that will do 0201's get a CP642 and upgrade the camera, or buy a CP643.(643's are set up for 0201's
Electronics Forum | Mon Mar 17 07:00:34 EDT 2008 | ectan5117
Hi, During SMT process, i found that solder splash on the gold pad. The distance between the COB pad with component pad is about 1.25mm. My question is what material can used to cover the COB pad without bringing contamination. And i am welcome to
Electronics Forum | Mon Mar 24 12:11:11 EDT 2008 | jdumont
Thats the one I found while researching this AM also. Thanks for the assist. Any ideas if this can be process related? Im sure it can be but its odd that it only happens on one vendors board. I think because it is an 10 layer board that maybe they ha
.png)
