Electronics Forum | Mon Oct 10 14:03:07 EDT 2011 | adp23
I have a few questions regarding Solder products being UL Listed or Recognized. I am aware that UL does test solder material (conductive material) using the UL 746 standard. However, i would like to know if UL actually recognizes the conductive mater
Electronics Forum | Fri Oct 14 12:03:32 EDT 2011 | fborja3
I want to start an assembly that may require use of SMT machines such as SMT assembly, bond wire, Xray and PCB fabricator machines. I apologize I am not to savvy with the technical names such as the above but I just want something not to costly or e
Electronics Forum | Thu Oct 27 15:57:57 EDT 2011 | sjs2303
Dave, I think he means that when the plough on the feeder peels back the tape, it exposes a few extra components that are yet to be picked. As a result when he is finished with the reel there are some components in pockets that are not required but
Electronics Forum | Fri Nov 18 11:43:05 EST 2011 | rway
What type of contamination is it? Flux residue or something else? If you are having contamination issues, you have a problem with your process. Simply washing the boards or using a roller may fix the problem, but you are treating the symptom, not
Electronics Forum | Fri Nov 04 13:35:17 EDT 2011 | travishemen
Nordson has a viscosity control system and a laser fan width control option. We use the viscosity control system on our machine. Basically it heats the material to a set temp. The laser fan width measures the spray pattern width with a laser and a
Electronics Forum | Tue Nov 08 07:23:03 EST 2011 | leemeyer
Thanks Bobpan, A function 6 tells me that I have firmware ver IVC 3.05. I keep getting a motor error 4 "The Xand/or Y axis did not reach the commanded position within 500 msec." The battery was dead on this machine so the mod codes were lost. I en
Electronics Forum | Mon Nov 28 13:03:15 EST 2011 | navin
Hi I am have some issuse with mydata machine my9 zmout.They machine is take a very long time to exchange tool form the bank and placed parts , i was told I need to replace the head,the bearing is bad,I replace the zmotor about 5 months back and the
Electronics Forum | Wed Dec 07 02:35:28 EST 2011 | mk15
Hi, I am looking for help with Error Philips Comet, Start Procedure -OK, INTIAL SERVO ORIGIN -OK, AUTORUNNING -OK, PCB START -OK, FIDUCIAL -OK, PICKUPCOMPONENT -OK, NEXT-ERROR E2 CORRECTION DATA ERROR(CORRECTION DATA IS NOT LOADED OR FAILED TO ADJU
Electronics Forum | Fri Dec 09 11:00:27 EST 2011 | alexanderb
Dear All, I am a totally new to the SMT process. In fact, I just had an overview course regarding the whole process of PCBA manufacturing and I have know a bunch of questions in my head. Most of them are linked to the solder paste printing process
Electronics Forum | Wed Dec 14 04:34:50 EST 2011 | caerleon
I am installing MSL (Moisture Sensitivity Level) Controls in the company. I have been trying to contact manufacturers to obtain the MSL level (1-6) for each family of part they produce. Well i havent had a great response as they say refer to the dat
