Electronics Forum | Tue Jun 19 21:44:20 EDT 2007 | rfrog
The first thing that I would do is contact the smock manufacturer and ask them for advice on testing the smocks. ESD FROM A TO Z 2nd ed. (Kolyer) states that: smocks should have a resistivity of less than 10^12/sq and must not shed steel fibers.
Electronics Forum | Wed Dec 06 19:58:54 EST 2000 | Dave F
We will say some novenas for you. IPC Standards are very easy to find at the IPC website, www.ipc.org International Organization for Standardization standards are very easy to find at IOS website, www.iso.ch/ Registrars for ISO certification are at
Electronics Forum | Mon Jul 16 15:44:27 EDT 2007 | davef
J-STD-001 doesn't necessarily require additional controls under conditions of low humidity, only that you verify the effectiveness of what you have in place. ESD S20.20 [1999] only says that relative humidity above 30% is "desirable". ESD S20.20 [200
Electronics Forum | Tue Oct 17 17:17:17 EDT 2006 | rgduval
I'm in the middle of developing an ESD program at my company, trying to adhere to S20.20 as much as possible (and the suggestions of the ESD audit conducted before I got here). I've been discussing the pros/cons of pink-poly foams and black foams.
Electronics Forum | Tue Dec 20 16:56:53 EST 2005 | rsmith
I manufacture ESD supplies such as smocks and conduct ESD audits from time to time. With that said, here is my deal on smocks...ESD smocks work well to shield harmful static charges on clothing such as wool, silk, and synthetic fabrics. It is like we
Electronics Forum | Thu Mar 08 07:27:07 EST 2007 | davef
What are you cutting at incoming? Meat? It doesn't matter that your troop are using ESD mats and wrist straps. Your proposed cutting board is an insulator. It a BIG piece of plastic. So, it will retain a charge. So when you move to adopting ANSI
Electronics Forum | Wed Jul 10 22:45:06 EDT 2002 | davef
A field meter would be nice. Suppliers are: http://www.sar101.com/cpf/handheld.htm We like: M265, Stat Arc II [Monroe Electronics, 100 Housel Avenue, Lyndonville, NY 14098 800-821-6001]. It would be good to words like 'chopper stabalized' in the d
Electronics Forum | Fri Mar 02 09:19:31 EST 2007 | Rob
Hi all, We are looking at putting cutting boards into our goods in area - for opening sealed bags to check the contents and to aid in decanting, and would appreciate any relevant input. The components should never come into direct contact with thes
Electronics Forum | Wed Mar 07 11:59:54 EST 2007 | Robbie
Hi all, > > We are looking at putting cutting > boards into our goods in area - for opening > sealed bags to check the contents and to aid in > decanting, and would appreciate any relevant > input. > > The components should never come into > d
Electronics Forum | Mon May 17 13:34:22 EDT 2010 | davef
If it's not adhesive, try an ESD-type ionizer. The objective of an ionizer is to eliminate surface charge on insulators and on isolated/ungrounded conductors. Practically speaking, the action of an ionizer is to drive the voltage on the surface of a
