Electronics Forum | Tue Oct 13 16:11:44 EDT 2009 | mikesewell
Not sure how many inspections need to be done at 15 - 20sec total per board, but you may need to install multiple SPIs/AOIs to hit your takt time. Mike
Electronics Forum | Tue Aug 28 14:21:39 EDT 2001 | Scott B
You have to be careful here. The figure is expressed as placement accuracy, not process quality therefore 3 sigma does not relate to 2700 PPM defects but 2700 parts per million placed outwith 15microns (0.0006" / 0.6thou). Extrapolating the distribu
Electronics Forum | Thu Aug 24 16:08:18 EDT 2006 | Frank R.
Thanks Bill and Dave for your help, Sorry Dave if I didn't search for information in archives. After wave process we have 2 ICT, 2 AOI machines 4 PVA conformal coating machine that will be use on 3 different lines. The quind of automation I want to
Electronics Forum | Tue Oct 13 22:56:22 EDT 2009 | cpcompany
Can anyone help me recommend or simulate a SPI > and AOI machine that can balance our FUJI NXT 1 > with 14 modules. We are using MPM accela printer. > 200 UPH is our target. > > Here's the PCB > dimension > > length(x) = 399.92mm width(y) = >
Electronics Forum | Tue Jan 26 10:47:39 EST 2010 | oeidave
Hi, Thank you for posting your question. Omron Electronics provides both High End AOI and 3D SPI systems. I believe that our S7oo series AOi and VP 5000 or VP 6000 3D SPI systems will meet your needs. Please feel free to contact me via email (david.
Electronics Forum | Tue Oct 13 20:13:06 EDT 2009 | kudamarani08
Hi Mike, it must be 100% machine inspection. Thank you.
Electronics Forum | Tue Jul 09 15:20:19 EDT 2002 | pjc
When you look at the capabilities of Combo machines they tend to sacrifice performance when compared to separate X-ray and AOI machines, meaning they don't do either the X-ray or AOI operations as well as a machine that was designed to do only one. A
Electronics Forum | Tue Oct 13 08:09:53 EDT 2009 | kudamarani08
Can anyone help me recommend or simulate a SPI and AOI machine that can balance our FUJI NXT 1 with 14 modules. We are using MPM accela printer. 200 UPH is our target. Here's the PCB dimension length(x) = 399.92mm width(y) = 141.626mm Thanks all!
Electronics Forum | Wed Jan 20 08:49:46 EST 2010 | edmaya33
I heard some of the manpower of KY transfer to VI technologies to introduce a new technology, same manner as of KY had. This french owned company post an impressive Inspection machine ( Both AOI and SPI ). Going back to ORBOTECH P36+, is there any
Electronics Forum | Fri Jul 15 13:28:55 EDT 2005 | Brian
A process consists of much more than just thee machine. When developing a cause and effect diagram ffor the process, there are many parameters that fall outside the machine itself. There are Man, Machine, Methods, and Materials. Just monitoring th
