Electronics Forum | Tue Nov 06 06:23:31 EST 2007 | clampron
Good Morning Roger, The Mirtec's can be adjusted to lower your false call rate. This can be done by reducing the matching percentage for each componnent but the result of this action is that the machine becomes less selective. If you lower them too
Electronics Forum | Tue Oct 18 14:59:35 EDT 2016 | muzzy
Hello. Our company recently bought a Samsung CP40V pick and place machine. It works very well, the software is intuitive but we have one problem. Is there a way to manually set fiducial position after machine failed to recognize it? For example, duri
Electronics Forum | Wed Jan 25 18:59:49 EST 2017 | superlen
When the fiducial fails, the machine stops with the crosshairs near the fid that couldn't be read. On the CP45 you just jog to the center and tell it use the position you just navigated to. (the manual correction). I believe the cp40 is the same...
Electronics Forum | Mon May 02 21:26:23 EDT 2022 | rob1
I have a problem with DEK 265 Horizon. During camera being homed after checking the fiducials, the camera failed to home properly and crashed into the back of the machine in the Y direction. I homed the camera in the Y and it appeared OK and I could
Electronics Forum | Thu Mar 22 17:24:19 EDT 2007 | coop
Have you tried changing the algorithym type in mark info. to special 1 or 2 ? you will have to perform an F6 on this after you change it. If you were on Normal before then you will want to lower the threshold from the what you have it set at ,probabl
Electronics Forum | Tue May 03 16:36:09 EDT 2022 | dwl
I don't know anything about DEKs so while you wait for a more informed response, here are a few brain droppings... Did something get knocked loose on the camera assembly? give everything a wiggle test and make sure it stays in place. Is the encoder
Electronics Forum | Thu Apr 09 11:49:49 EDT 2020 | stephendo
I don't think that there is an industry standard on that. Each machine manufacturer will have to say what they mean. I think the first option looks at what you taught and then looks at what it sees when looking for the fiducial. The other method sou
Electronics Forum | Tue Jul 29 13:27:49 EDT 2008 | jdd
PPM on AOI, this is our metric for false fail on AOI machines. Our target is 1000 ppm but I'm not sure about this target for low volume. (1,000 false fails on 1000,000 of inspections) thanks
Electronics Forum | Wed Jul 29 01:58:08 EDT 2015 | buckcho
Hello, there are several great machines you can choose from. I would recommend making a benchmark, if you can. You chose 4 machines that meet you requirements (mostly prize range) and make them program and debug one of your products. After that insp
Electronics Forum | Tue Jul 29 13:20:55 EDT 2008 | gabriella
330 000ppm on low volume. what is the parameter you are talking about? PPM on AOI?
