Electronics Forum | Thu Sep 19 14:30:55 EDT 2002 | pizzafred
Help! I am about too buy an AOI system. However, I cannot make any difference between Cyberoptics/VI Tech/MVP. Can any one help
Electronics Forum | Mon Sep 23 12:44:48 EDT 2002 | daanterstegge
Another issue to look at is the efforts that it takes to become familiar with the machine. Where I work we are also looking into AOI machines, and one of our requirements (based on how simple the vendors say their machines are) is that after no more
Electronics Forum | Thu Sep 19 16:58:04 EDT 2002 | dragonslayr
You definitely need to have live demos of each system, using your specific assembly if you want to compare apples to apples. Each of the AOI OEM's you mentioned have plus amd minus to their unique systems. You will need to evaluate your specific nee
Electronics Forum | Thu Sep 19 21:46:01 EDT 2002 | scottefiske
In the past year I was responsible for developing and leading a Team focused on AOI, Evaluation, Justification, and with a full ROI required, supporting a HMLV manufacturing environment. If you have in these economic times the additional resources t
Electronics Forum | Wed Aug 22 12:39:58 EDT 2001 | andyy
From the manufacturer's perspective, we aim to be able to fully inspect all components within the beat rate of the line and generally do. I'm not aware of any competitive machines that do the random sampling that is suggested above, however it is do
Electronics Forum | Fri Aug 03 09:21:08 EDT 2001 | Ian T
hi my company is planing to purchase an aoi system to be used inline. is there anyone out there doing this, if so do you use all the machine options (pattern character recognition, bad board marks, correct part polarity...) or do you dumb it down(pa
Electronics Forum | Tue Apr 15 08:38:23 EDT 2003 | pjc
Don't have any specific links to papers and articles. Try searching on the IPC.org (plus APEX show http://www.goapex.org) and SMTA.org web sites. Any papers and articles on the process from equipment mfg.'s should be taken with a grain of salt. Sold
Electronics Forum | Thu Mar 11 07:11:26 EST 2010 | meritajs
We are searching for low cost acceptable AOI system. Only one we found for about 20K USD is AOI OK600 from Dektec automation, Chine. Maybe anybody have had experience with such equipment and it support. Any advice in choosing AOI is desirable.
Electronics Forum | Fri Feb 13 13:28:12 EST 2009 | ccross
Need some help here. Our RS-1 Rework Station that we purchased with our AOI system crashed. Agilent is no longer supporting this product. We have not been able to recover a driver for the video card or the opto board in the system. These should be *.
Electronics Forum | Tue May 12 11:02:31 EDT 2009 | jabilandy
Hi, We currently have 2 of these systems but use an in-house repair station tool. If you are saying that you need some drivers from the actual machine - I could maybe help you out ??
