Electronics Forum | Thu Aug 17 19:29:54 EDT 2006 | foxhound
Im having problems with my ap 25. I get the air pressure fault alarm when it boots up so I bypassed the air pressure switch but I still get the alarm. The air routes through the machine as soon as I hit the on button, I thought it wasnt suppose to
Electronics Forum | Fri Aug 18 09:29:20 EDT 2006 | chrisgriffin
I would measure the voltage on the yellow wire going to the air pressure sensor. Are you getting 24VDC? If so, maybe replace the input DC module on IO card #2. I think it is IDC module 8 on that board. Try not to have too many violent thoughts.
Electronics Forum | Wed Oct 25 21:39:16 EDT 2023 | heinar
Hi, i not found bios battery...
Electronics Forum | Mon Jun 12 10:38:00 EDT 2017 | highmillr
Getting this error more frequently. Whats causing this?? I have to reset machine every time costing man hours. After resetting its fine but does it at least once a day.
Electronics Forum | Mon Jun 12 23:52:58 EDT 2017 | aemery
Don, either you have a faulty park sensor or much more likely the vision gantry Y axis is not reaching the sensor. Possible issues, one of the two VY drivers cards is failing; one of the VY forcer motors (air bearings) is failing; to much air leakin
Electronics Forum | Tue Dec 09 11:40:38 EST 2008 | dwl
Hello, I have an MPM AP 25 and the camera parks itself over the worknest, so when the z tower tries to rise to print, it collides with the camera. Is there some way to adjust the park position so that the camera in not in the way of the Z tower? Than
Electronics Forum | Thu Nov 12 10:16:25 EST 2015 | goodting
Good day. I am asking if anyone knows how to access/have a copy of our BIOS file. This BIOS file which was designed by Phoenix , called biosrec.zip. Each day, we used the main EPC-1316(PCA,CPU/PMC)card to boot our Advantis machine; but the speciali
Electronics Forum | Tue Aug 23 14:25:50 EDT 2005 | pjc
Here's the oil: BIO 30 - Biral Industrial oil (operates to +300�C ) BIO 30 is an extremely high quality synthetic industrial oil for a wide number of applications. BIO 30 leaves no carbon deposits and is highly resistant to oxidation. An outstandin
Electronics Forum | Wed Aug 28 16:44:05 EDT 2024 | pf
What lubricating oil do you recommend for the air pressure regulator of an MPM AP25 printer?
Electronics Forum | Tue Dec 18 15:56:41 EST 2007 | realchunks
We use alcohol in our APs to clean our stencils.
.gif)
winsouce.jpg)
