Electronics Forum | Fri May 04 14:47:15 EDT 2007 | jasont
Chris, I have x2 units available in my Brockville, Canada warehouse now. They are off MPM UP 2000 HiE's and the model #'s are as follows; MCU012A-SOO AP25-917A Please e-mail directly at jason@tekmart.com Looking forward to your reply, Jason
Electronics Forum | Thu Aug 02 14:25:15 EDT 2007 | patrickbruneel
Goat piss now that is a great example of a renewable resource. But if the goat chews on toys made in china you have leaded goat piss. Have you seen this article? http://www.cnn.com/2007/US/08/01/toy.recall.ap/index.html I believe lead in electronic
Electronics Forum | Sat Aug 04 08:09:03 EDT 2007 | rich7799
I found the problem... the vx cable trunking was the wrong radius, so when the axis was moving at slower speeds to read pre stop position, the axis was not reading the platen correctly due to extra downward force.. Ive now replaced the trunking and
Electronics Forum | Tue Mar 11 13:12:56 EDT 2008 | swag
Careful when you get them! I ordered some overnight some time ago because I was too disorganized to have spares. An operator set a heavy steel vise base on top of the bag-o-bulbs while I was taking off the camera cover and crushed all the new ones.
Electronics Forum | Tue Oct 13 01:39:37 EDT 2009 | jjmag921612000
If you are using a current board program, and then modifying to your new board. It is possible to have the wrong PCB dimension data in for your new PCB. You should review all of you basic information about the pcb, and then go into the fiducial teac
Electronics Forum | Mon Oct 17 10:14:32 EDT 2011 | swag
Do you have cal. fixture(s)? If not, one 1/2 baked way to get yourself closer quickly is to go into your programs and write down your x/y offsets that you've gained during vision offsets while in production. Compare them - hopefully they are very s
Electronics Forum | Sun Jan 13 17:09:58 EST 2019 | sarason
Attach a 3V cell using jumper clips to your existing cbpard, then swap out the dieing cell. if you are lucky you may be able to continue without having to find hat floppy disk. You will still need to know the PW: Given that this is basically an old P
Electronics Forum | Thu Feb 19 13:39:51 EST 2009 | tedel
Yes, I called Fuji as well!! I guess we're all in the wrong buisness... Received a reply from Biral Lubricants in Norway, they state the following... "We have established our own warehouse in St.Petersburg, Florida and handle presently all inquirie
Electronics Forum | Wed Feb 23 13:22:31 EST 2022 | micropak
Congratulations on being operational again... Few years ago, I acquired a Siplace line (S20 + F3 + S15 + G2) and I rebuild it completely because the line was lying idle for more than 10 years. All belts, pneumatic cylinders, pneumatic pipes were cha
Electronics Forum | Tue Jun 01 05:17:16 EDT 2004 | Alistair MacAdam
I am currently looking at the volume of paste being deposited on a PWB 2.4mm thick with a 0.25mm tolerance. I am looking for information on PWB variation and a MPM AP25 series printer, and can the volume of paste be controlled on varing PWB thickness
