Electronics Forum | Mon Apr 10 09:48:43 EDT 2000 | Dave C.
John, having worked at a major U.S. telecommunications co. I can tell you we were placing through hole connectors in SMT. Using MPM printers 3000 2000 AP36 AP24. We opened the apertures on the stencil 25% over lead diameter to allow more paste(it wou
Electronics Forum | Tue Jan 13 12:43:24 EST 2004 | cyber_wolf
I have to disagree with Fastek. We only use dedicated tooling on our AP machines. Dedicated tooling pros: *Set up time is 90%+ faster than universal tooling. *It is very easy to train operators to install dedicated support plates. *You do not need
Electronics Forum | Fri Sep 22 12:21:06 EDT 2006 | daxman
We are using the Universal tooling..the one with the side plates. I'm not sure what the C-tool is. The machine did not come with much. I'm running the vision system test now..I've never done it before..but I'll let you know what happens with it. To
Electronics Forum | Tue Sep 26 09:57:19 EDT 2006 | daxman
Thanks Chris... I do not have the c-tool, but I did make some adjustments to the middle cube when I was calibrating it. Like I said in an earlier post, I cleared the vision offsets in the ap.cal file and adjusted the middle cube until the board alig
Electronics Forum | Wed Mar 25 11:16:35 EDT 2020 | richardcargill
Currently working through a myriad of air leaks on an old MPM Ap -b and have a question that hopefully one of you fine people may know the answer to. The camera vx and vy use linear rail motors. As far as I can tell, there are nozzles between the sur
Electronics Forum | Tue Jul 27 19:02:46 EDT 2004 | pdeuel
Not an easy task and requires calibration jig. MPM support field service is your best bet. The adjustment screws for the prizm located on left side of camera will adjust the x direction. There is a set screw on the front that must be loosened first.
Electronics Forum | Sat Oct 18 22:41:54 EDT 2014 | pfifla1
Can't help you with the manual but do have some > tips: If it was shipped, it's possible someone > tied axis or blocked stuff for shipping. Look > for that. Look for bent sensor flags + go into > I/O and check to see all sensors you can find a
Electronics Forum | Fri Aug 03 16:46:59 EDT 2001 | davef
It's OK to have a thin film or haze of paste left on the stencil. Printing nice bricks of paste is the important thing. Assuming you know these things, so tell us more about your situation. PRINT QUALITY: What do your paste deposits look like?
Electronics Forum | Fri Sep 17 15:20:52 EDT 1999 | Earl Moon
| HI everyone, | | We are using a Siemens ap-25 screen printer, in the past we have not had any problems with adhesive placement until a couple of weeks ago. It seems the x axis has decided that it should be set somewhere between .00085 and .001
Electronics Forum | Tue Apr 01 11:18:47 EST 2003 | cyber_wolf
Is anyone out there successfully screen-printing SMD adhesive on an 0402 layout? We have successfully done 0603 and larger, but the deposition consistency on the 0402's is just not there. We don't always get enough epoxy on the board. We have tried a
