Electronics Forum | Fri Sep 17 21:25:00 EDT 1999 | Rob
| | HI everyone, | | | | We are using a Siemens ap-25 screen printer, in the past we have not had any problems with adhesive placement until a couple of weeks ago. It seems the x axis has decided that it should be set somewhere between .00085 an
Electronics Forum | Sun Sep 25 20:20:22 EDT 2011 | johnyq
We recently aquired an old MPM-AP25 stencil printer that printed paste with a large error (about .060 inches). I concluded camera alignment to be the cause but was surprised by the magnitude. I found the camera beam splitter prism misaligned and loos
Electronics Forum | Fri Sep 17 23:59:40 EDT 1999 | JAX
| | | HI everyone, | | | | | | We are using a Siemens ap-25 screen printer, in the past we have not had any problems with adhesive placement until a couple of weeks ago. It seems the x axis has decided that it should be set somewhere between .00
Electronics Forum | Fri Sep 17 15:43:08 EDT 1999 | Dave F
| HI everyone, | | We are using a Siemens ap-25 screen printer, in the past we have not had any problems with adhesive placement until a couple of weeks ago. It seems the x axis has decided that it should be set somewhere between .00085 and .001
Electronics Forum | Thu Jul 21 03:54:39 EDT 2005 | Rob
Never thought I'd hear myself say this (& I will punish myself later). Whatever you do, don't buy an AP25, CP4 or IP2 for starting out in low volume. 1) You will need a LOT of space 2) You will need a very good constant air supply else the AP25 wil
Electronics Forum | Fri Jan 04 22:01:25 EST 2013 | bradlanger
Depending on the age of your machine you should be able to find an IDE hard drive that will work at an online computer parts store like Newegg.com or Tiger direct. There is a possibility on the older machines that the motherboard bios could limit th
Electronics Forum | Mon Sep 25 12:50:42 EDT 2006 | chris g
Daxman, The diagnostic results didn't look very pretty. Especially on the vision x standard deviation. Any time there is an asterisk, that is a bad thing. The failure number for all axis, excetp theta, is .0002. Could need more air flow to the x
Electronics Forum | Tue Oct 14 10:52:35 EDT 2014 | swag
Can't help you with the manual but do have some tips: If it was shipped, it's possible someone tied axis or blocked stuff for shipping. Look for that. Look for bent sensor flags + go into I/O and check to see all sensors you can find are working.
Electronics Forum | Sat Aug 03 08:44:11 EDT 2002 | P. Kannan
We are having 3 MPM UP-2000 printer & 1 AP-25 printer with us. I would like to have the technical guidance for my following application. For one of our model, there is a requirement of Glue & solder paste on same side of the PCB. Currently we are u
Electronics Forum | Tue Sep 24 07:32:58 EDT 2002 | cyber_wolf
Pete: It is a Panasonic Camera. MPM tells me that they no longer sell parts for that vision system, and in order to fix this problem I have to do a vision up-grade. The upgrade is over 20K if I remember correctly. That is not going to happen. I hav
