Electronics Forum | Thu Apr 12 23:46:21 EDT 2007 | Ola
Don't get to serious about Dr. Mumtaz Shocker, Dr PhD etc. ingeneious. I think this forum is totally a wrong place to be if talking about metallic fabrication of whatever spring "vsan" whish to fabricate...
Electronics Forum | Tue Jun 20 00:31:18 EDT 2006 | Frank
I, too, would bend it 90-degrees prior to assembly and I would also put on a little spring loaded, removable, heat sink on to the wire to stop the heat transfer up the wire. After the wire is soldered, then remove the heat sink. Try the one from Ra
Electronics Forum | Fri Jun 18 11:37:10 EDT 1999 | Earl Moon
| | | | first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pa
Electronics Forum | Fri Jun 18 15:04:19 EDT 1999 | Scott Cook
| Scott, | | I do hurt easy. Be gentle, at least that's what I tell all the women in my life though quickly diminishing supply - oops. I do not happen to believe this statement. I have seen you dodge many a penned "dart" on this very forum. Since I
Electronics Forum | Fri Jun 18 15:54:29 EDT 1999 | M Cox
| | Scott, | | | | I do hurt easy. Be gentle, at least that's what I tell all the women in my life though quickly diminishing supply - oops. | | I do not happen to believe this statement. I have seen you dodge many a penned "dart" on this very foru
Electronics Forum | Mon Sep 17 11:07:45 EDT 2007 | floydf
We had the mother board in a Samsung CP40 stop booting up. We have since fixed that (reseated the cpu). I tried putting a pc in place of the mother board. I loaded the program, and plugged the bus line that commuinicates to the machine in the pci slo
Electronics Forum | Wed Sep 19 10:34:44 EDT 2018 | sarason
Now I have to guess and make a few assumptions. Without looking at the back side of the board my guess is you have some 400-100V diode bridges before the resistor ,zener and the FET . The FET is a 500V 0.85 Rdson NFET. All of this suggests a chopper
Electronics Forum | Tue Jun 01 12:48:49 EDT 2004 | pjc
AP25 can handle warped boards to a degree. I also depends on the board clamping system on the machine. There are three avbl. First is Universal Vacuum box, second is dedicated tooling with vacuum and third is Y Snugger tooling that does not use vacuu
Electronics Forum | Tue Jun 01 05:17:16 EDT 2004 | Alistair MacAdam
I am currently looking at the volume of paste being deposited on a PWB 2.4mm thick with a 0.25mm tolerance. I am looking for information on PWB variation and a MPM AP25 series printer, and can the volume of paste be controlled on varing PWB thickness
Electronics Forum | Wed Sep 20 10:45:11 EDT 2023 | kirill
Hello A scan board and scan full options has stopped working for me. Any idea how to make these functions work again ?
