Electronics Forum | Mon Jul 16 15:49:33 EDT 2001 | Steve
The solder balls you are talking about are caused by too much paste. Reduce the size of the stencil aperatures. Concerning removing the solder balls, the first thing you need to ask yourself is, do I need to remove them. IPC-610, 12.4.10 states, "Ac
Electronics Forum | Mon Oct 11 13:05:51 EDT 1999 | Dave F
| | Folk's, | | | | I'm just tying up some loose end's on my Master's Thesis on solderballing @ wave soldering and the effect the topography of the mask / PCB has on it. | | I was wanting to do a straw poll on you guy's as to the type of resist's yo
Electronics Forum | Mon Oct 11 12:24:07 EDT 1999 | John Thorup
| | Folk's, | | | | I'm just tying up some loose end's on my Master's Thesis on solderballing @ wave soldering and the effect the topography of the mask / PCB has on it. | | I was wanting to do a straw poll on you guy's as to the type of resist's yo
Electronics Forum | Mon Oct 11 06:00:27 EDT 1999 | Brian
| Folk's, | | I'm just tying up some loose end's on my Master's Thesis on solderballing @ wave soldering and the effect the topography of the mask / PCB has on it. | I was wanting to do a straw poll on you guy's as to the type of resist's you are us
Electronics Forum | Thu Oct 14 08:01:48 EDT 1999 | JohnW
Gee Dave That's the first time I've ever seen myself listed for a quote! Brian, what your saying is on the whole right, on the surface of it the mask, as long as it's cured properlay shouldn't make a difference but I have to say that I've found so f
Electronics Forum | Thu Oct 14 07:55:48 EDT 1999 | JohnW
Sorry Dave should have said... At the mo all my data is for no clean processes using both matte and gloss finishes. That doesn't mean your feedback has to be limited to this area, I'm really trying to find out what the rest of the world are doing if
Electronics Forum | Sun Oct 10 17:57:48 EDT 1999 | JohnW
Folk's, I'm just tying up some loose end's on my Master's Thesis on solderballing @ wave soldering and the effect the topography of the mask / PCB has on it. I was wanting to do a straw poll on you guy's as to the type of resist's you are using Glos
Electronics Forum | Mon Oct 11 13:08:29 EDT 1999 | Dave F
| Folk's, | | I'm just tying up some loose end's on my Master's Thesis on solderballing @ wave soldering and the effect the topography of the mask / PCB has on it. | I was wanting to do a straw poll on you guy's as to the type of resist's you are us
Electronics Forum | Mon Nov 02 17:45:46 EST 1998 | ChrisK
In my experience, solder balls are normally caused by only a few things. In order of likelyhood: 1) Water based fluxes (VOC-Free)not having the water carrier completely dried from the board before going into the solder. I.E, too fast conveyor spee
Electronics Forum | Tue Sep 14 19:47:16 EDT 2004 | davef
use something other than HASL. "The rest of the world seems to be processing with no problems..." [Hello!!! Earth to Carol. This is a test.] Things you are considering could be more trouble than they�re worth. "1) Reduce via hole size" [If you re
winsouce.jpg)