Electronics Forum | Wed Sep 08 16:55:50 EDT 2004 | bwet
Does anyone know of a reliable service arm outside of H-P/Agilent that can reliably service 5DX XRAY systems?
Electronics Forum | Fri Sep 08 13:51:19 EDT 2023 | carl_p
It's been some time since I used these machines. Are the sensors/arms ok at the top of the turret, their like arms that can move 90deg out....
Electronics Forum | Thu Sep 09 02:50:36 EDT 2004 | fastek
Depending on where you are located, I might.
Electronics Forum | Fri Jun 09 08:00:55 EDT 2006 | samir
Rob, Here in Riyadh, you'd get your arm sawed off for making statements like that! :)
Electronics Forum | Wed Apr 09 03:21:36 EDT 2008 | fnorradd
Hi Steve, The adjustable workboard holders are a mixture of universal and aftermarket, they do not use the clamp down arms which were originally with the universal pbs holders, they are the type which have two grub screws holding the clamps to the h
Electronics Forum | Tue Feb 06 18:46:13 EST 2007 | darby
Imagine you put two 8mm feeders on the rear feeder plate, they are about the same distance apart as the length of your tray. On top of these feeders are two slotted arms that allow you to move the arms towards the moveable rail. You place your tray o
Electronics Forum | Tue Dec 05 20:33:04 EST 2000 | Dave F
Plaaaatttt!! [you can see it if you make like you're responding to it] So much for that ... In words, its a star with five arms. * At 9 - two dots side by side * At 12 - two dots, one under another * At 3 - two dots side by side * At 5 - two
Electronics Forum | Fri Jul 21 17:27:15 EDT 2000 | Travis Slaughter
I once long ago in a place far away had a digitizer that through a series of arms and encoders could be used to plot placement points on a PCB for which there was no CAD or Gerber data. I now find myself in need of this again but the digitizers I hav
Electronics Forum | Mon Oct 31 18:54:56 EST 2005 | PWH
Our Universal HSP 4796B is throwing nozzles completely out of heads near where the cam-arms/plates (not sure what to call them?) push them back in to the top, parked position after use. My first thought is that the cam arms have become out of toler
Electronics Forum | Mon Apr 10 12:54:43 EDT 2006 | cyber_wolf
Is anyone out there using the newer style Fuji feeder calibration jig ? It's the one that has the LCD on it. My current feeder cal jig just measures pick point center. This newer style gauge measures advancing arm height,bend in the advancing arm br
winsouce.jpg)
