Electronics Forum | Mon Apr 03 08:51:43 EDT 2017 | teslalab2
When you update a Quad to windows, they replace the epcu card with some other card, does anyone know the part number on that card? Thanks
Electronics Forum | Thu May 13 07:12:30 EDT 1999 | carl
Hi All; Has anyone out there used a company called ENSIL out of N.Y. state to repair equip. (machine, Fuji, etc) circuit cards? Carl B.
Electronics Forum | Wed May 29 10:28:24 EDT 2019 | etmpalletguy
#1) Is the card in panel form: (Y)/(N) #2) PCB thickness: Thin card: YES, Thick card: See above. #3) is the PCB warping during reflow? (Y)/(N) #4) Is the PCB Symmetrical is shape & size? These are just some of the questions you need to ask yourse
Electronics Forum | Tue Aug 31 20:06:12 EDT 2004 | adiaz
Hello All, We have our MPM AP25, S/N: 6791 down due to problems with the following cards: - P1280 - Digital Motion Controller - PC101 - Motion Interface Board These boards are obsolete and are not in stock, we would like to know if you may have th
Electronics Forum | Wed Apr 06 05:08:07 EDT 2005 | blueflag
New morning but still the same agro'. The story so far - Have checked the fuse on the back plane and it had blown again, changed it has been ok. Swapped the mot-z board around with piggyback mi card, no new other/moved problems. When doing base cente
Electronics Forum | Wed Jun 04 00:28:27 EDT 2008 | chrispy1963
There are a couple of things that you can do. First thing to do is take a flashlight and shine it in the card edge connector of slot 2 and see if a passive component or any other part worked its way into that slot. This will cause multiple leads in
Electronics Forum | Mon May 13 10:08:44 EDT 2013 | rgduval
I've heard that MyData is no longer supporting the TP's, so, getting a new motor might be a difficult proposition. If you can find the motor manuf/part number on the motor itself, you can likely find it on line somewhere...Google the p/n should do i
Electronics Forum | Wed Oct 23 16:17:17 EDT 2002 | nwyatt
CSP is similar to BGA process in that you need to undergo a reflow process to properly solder the chip. Also, a soak period is desirable to promote outgassing. You do not need nitrogen. We are building CSPs in a regular convection oven without n
Electronics Forum | Fri Oct 26 11:37:27 EDT 2001 | Dave G
You could start by putting together a matrix of P/N's vs product. This will tell you which parts are common with most of your jobs. These would then become part of a fixed feeder setup that would stay on the machine. (These will probably be mostly R'
Electronics Forum | Wed Jul 21 10:38:10 EDT 2021 | bukas
I got Samsung CP45FV NEO with Cognex 1063200006110P single board computer. This machine had about 10 data corruption problems in past two years on both classic ATA and industrial ATA SSDs. I suspect there may be something wrong with Cognex card and t
