Electronics Forum | Thu Jul 15 15:57:39 EDT 2021 | kumarb
Here you go: https://we.tl/t-qQkEpE8H3p Suggest to also contact Trans-tec USA for any questions that you may have about this tool or any other. As an owner of the machine from Assembleon / Yamaha - they offer support. They have been great to suppo
Electronics Forum | Thu May 20 22:38:01 EDT 2021 | kumarb
For closure to all readers of this thread...many thanks to Michal for this support. Trans-tec (USA) was great in replying to our countless emails on this topic. We sourced a replacement solenoid # A041E1-48W for our Emerald-X = YV88X. The part was a
Electronics Forum | Mon May 17 10:59:02 EDT 2021 | kumarb
Hi. Have an Emerald-X machine with FNC purchased refurb from Assembleon with mixed results at 3500 hours. Had it sitting idle for years due to assorted issues after their installation. Only now after much time and parts investment have the machinery
Electronics Forum | Tue May 18 09:58:17 EDT 2021 | kumarb
Thank you so much for the advice. We were suspecting blockage but know that we have clean nozzles. Did the air blow out and removed a spot of black matter - perhaps what was an old o-ring? Nozzles are 61 and 62 posing the issue. Our tech said that 64
Electronics Forum | Mon Aug 22 20:51:32 EDT 2005 | Cmiller
I was told by Assembleon that a Topaz can not be fitted with a 54mm camera. Only the 45mm. The Emerald? or whatever the 4 spindle machine is called, is the only one with a 54MM camera. Is this not true? I am talking used Topaz, 1997 to 2000 models. P
| 1 |
