Electronics Forum | Tue Jun 26 21:41:10 EDT 2007 | davef
4.4 Determine the amount of flux on the board. 4.4.1 Get a piece of corrugated cardboard and a weighing scale accurate to 0.01 grams. NOTE: Use cardboard with alcohol fluxes to slow their evaporation and get good data. 4.4.2 Weigh the cardboard. 4.4
Electronics Forum | Thu Mar 03 19:43:19 EST 2011 | jeffr
The order is:- x..y..r..signofland.(19 characters) then.... Byte 28-31 component.(000~09f6), Byte 24-27=fid (0000~01ff), Byte 20-23=bad (0000~01ff), Byte 18-19=mount order (00~of), Byte 16-17=head (00~of), Byte 14-15=skip00:/exec01:/note02:, Byte 12-
Electronics Forum | Wed May 11 14:34:03 EDT 2011 | thejedeye
Google, Documents, spread sheet, public access. Or try a DropBox account. This is an invite link. http://db.tt/5UBwDPV NOTE:FYI:if you use the link and join I get 250 Mb more storage. There are other types like it out there, a customer has such
Electronics Forum | Tue Aug 27 18:14:12 EDT 2019 | spoiltforchoice
You don't want an AOI machine you want an FAI (First Article Inspection) like one of these http://www.aoisystems.com/Scanner-Based-FA-Inspector.html (note some of the products here call themselves AOI, arguably they are not.) Or https://www.quins.de/
Electronics Forum | Wed Oct 07 15:23:10 EDT 2020 | spoiltforchoice
MyCronic are literally the only ones in the market, Essemtec do Jet printing but make no attempt to sell it as a full printer replacement in the way MyCronic do. I was told by MyCronic "The MY500's are reducing in numbers now and spares support is co
Electronics Forum | Tue Jul 05 22:10:42 EDT 2022 | nellegaard
I am currently trying to setup a used MyData My19 machine and am currently having issues installing tools getting errors such as failed to pick up tool and Z force sensor failed. I have tried to clean the tool pickup area as well as clean and lubrica
Electronics Forum | Sun Jun 05 02:19:51 EDT 2005 | Frank
Call your local Juki sales rep. The Zevatech machines are really relabelled Juki machines. The Juki software is called EPU and it maintains a database of your part numbers, as well as, assigning feeder locations in optimal positions. Also look int
Electronics Forum | Fri May 04 19:23:28 EDT 2007 | darby
System > Machine Config > Mechanical OP > Head 3 Spec = Vision. Data In > System > Machine Config > Mechanical OP > M Centering 1 = Yes If your Centering unit is a two stage unit then also set M Centering 2 = Yes You should then be able to roughly
Electronics Forum | Tue May 18 21:43:02 EDT 2010 | ashley
Hello mickd, 1) The EL data & Vision_type is NOT necessary when using MCS30 for IP1 machine. note : your input of the above might have cause confusion during VP, hence the OS error. 2) I would suggest the following... 2a) lower the Lead_check_are
Electronics Forum | caldon |
Wed Jun 04 13:19:57 EDT 2003
