Electronics Forum | Tue Jun 01 16:42:48 EDT 1999 | Scott S. Snider
| After lots of years with Panasert machines, I am starting to need to learn again. | 1. For the AP-20 can you retrofit 3D vision? Would you bother? | 2. Also for the AP, can you use 20x20 DEK screens with an adapter? | | Thanks to all you MPM expe
Electronics Forum | Fri Feb 07 16:36:30 EST 2003 | jonfox
About as good as you are going to get for a general (broad) package download is from the two dummy component companies listed. If you want something better and corresponds to the parts that you are using (not dummy parts) download the data sheets fo
Electronics Forum | Wed Jan 04 14:59:41 EST 2006 | AOI
I have used all of test and inspection techniques available out there: AOI, AXI, Flying Probe, ICT, and FCT. The reality is that they all have a place in manufacturing based on the type and complexity of product you bild, the industry it is intended
Electronics Forum | Mon Apr 30 09:55:50 EDT 2007 | rgduval
We're running an older TP9-U, and clocking in somewhere around 3000 cph, realistically. Placements, however, are very accurate. Works fine down to 0402's, high-pin count QFPs, etc. My -U doesn't do great on optical centering...it works, but it's a
Electronics Forum | Thu Oct 11 17:32:59 EDT 2007 | wayne123
In Block repeat information did you put the rotation in before optomizing? This is where the machine gets the rotation of these individual boards. The Block fiducials are good to use, but they aren't for defining rotation. If you optomized using note
Electronics Forum | Fri Feb 15 15:55:58 EST 2008 | pjc
This is from the OmniFlo 5 Engineering data sheet: EXHAUST SPECIFICATIONS: STANDARD AIR OPERATION: - Load-end: 150 cfm (255 m3/hr) at the 4� (102 mm) stack (minimum requirement) - Unload-end: 300 cfm (510 m3/hr) at the 4� (102 mm) stack (minimum req
Electronics Forum | Tue Apr 15 11:58:20 EDT 2014 | superlen
Sarason, I will send you some samples. Note, however the .pcb file has a LOT more information in that just placement data, it has vision code definitions, part specific fields such as number of pick retrys, pickup/placement delays, speeds, feeder xy
Electronics Forum | Fri Apr 17 12:15:01 EDT 2015 | superlen
Sarason, Thanks for the info. No worries on a slow response. There aren't many Samsung Users that frequent here I don't believe, so I knew this was a long term approach to gathering data. (Any samsung users feel free to just hop on this thread to sa
Electronics Forum | Tue Sep 20 14:13:43 EDT 2005 | Rich
I use Cad2Cad v1.5 with Phillips Topaz. I don't know how much is differs, try this: Converting data to a Philips VIOS Text File format: 1. Open the pick and place data in Excel and format it to look like table 1. ** Make sure you delete the �mm�
Electronics Forum | Fri Nov 20 00:16:24 EST 2015 | bwetman
Hyperterminal is a standard Windows assessory located in the "Communications" folder.Here are some steps of data received through the hyperterminal in the PC. (1)Connect your device with your system through RS-232 cable or USB-to-Serial adapter and c