Electronics Forum | Wed Jun 24 10:17:50 EDT 2020 | kylehunter
> Hi. Guessing that you are operational by now? If > not, consider to use BGA definition and use the > editor to define where the bottom side pads are > or are not. Just our 2 bits input. The Assembleon > X / Yamaha units are quite
Electronics Forum | Fri Jul 26 20:20:06 EDT 2019 | kylehunter
This week we assembled around 30 panels of a LED board, totaling around 350 boards. In doing so we had to work around a really crazy issue. 1) A board goes in, all components are placed perfectly. 2) Next board goes in, all components are around 5m
Electronics Forum | Thu Oct 06 00:41:56 EDT 2005 | vinitverma
Hi, If you're thinking of a new machine and the volumes are not very high, I think Assembleon's OPAL XII should be the best fit. It can handle VERY LARGE boards upto 25.5" x 17" (with single pass) and 25.5" x 33.5" (with double pass). However for th
Electronics Forum | Thu Jun 03 08:03:22 EDT 2004 | vinitverma
You can have a look at Assembleon (formerly PHILIPS EMT) equipment. They have equipment ranging from rated speeds of 6500cph to 150,000cph. I guess their OPAL XII should be the best fit machine in terms of its capability and speed both. It can do fro
Electronics Forum | Thu Jul 15 15:57:39 EDT 2021 | kumarb
Here you go: https://we.tl/t-qQkEpE8H3p Suggest to also contact Trans-tec USA for any questions that you may have about this tool or any other. As an owner of the machine from Assembleon / Yamaha - they offer support. They have been great to suppo
Electronics Forum | Tue Nov 21 14:02:34 EST 2006 | jimmyjames
We have 2 Assembleon Opal X II machines, each with 8 head upgrades placing up to 14k CPH. We have got quote back from Essemtec, Asymtek and Camalot. The thing that is holding us back the most is our realatively small budget of $50k US. Screen prin
Electronics Forum | Wed Mar 29 03:40:06 EST 2006 | Frank
The Juki 2060 can have both front and rear trolleys and you do not loose any feeder locations. My question was why can't the Assembleon put trolley on the rear? I recently visited a friend at a company that used a lot of Assembleon and compared run
Electronics Forum | Sun Oct 06 12:28:08 EDT 2013 | christian01976
Hello. I just can say: buy it! We have some older Yamaha machines (Assembleon in europe). Topz X2, two Opal X2 in line and a line of MC24 (YS24) and MC1 (YS100). And those machines are really good. I have no bad things to say about them. Greetings
Electronics Forum | Tue Feb 26 16:07:07 EST 2013 | kevslatvin
What vintage are the gem series you are running? We have some '06 Opal Xii's and place 0201's with them. Haven't tried 01005's. I know you said new but Cardinal Circuit has an auction gonig right now that has a 2010 Assembleon MG1 and a 2006 MG2 and
Electronics Forum | Sat Mar 25 16:57:30 EDT 2017 | zippi
Hi, Our Company write a new software to Convert p&p files to assembleon text or xml file. We use it with an Ellipse 2, topaz X and an OPAL XII. You can check all positions compare with Gerber, set database number and compare component size, set fidu