Electronics Forum | Wed Nov 21 13:42:12 EST 2007 | etienne
To answer your question: During my experience with Topaz machines, we had to replace 4 Heads on different occassions with different operators involved. Also I encountered several Head crashes with Eclipse machines. To buy such replacements here in Ma
Electronics Forum | Mon Nov 12 12:00:59 EST 2007 | wayne123
A philips Topaz is a good machine, I have accurately placed 0402's without a problem, Fine pitch QFP no problem, BGA's not a problem, I am not familiar with the TP9 so hopefully the other guy can answere questions on that, The Topaz is rated at about
Electronics Forum | Wed Jun 24 14:42:03 EDT 2020 | kumarb
Hi. Heck no! First, you should find out the Yamaha equivalent of your machine, if known - that is a more common reference when sourcing parts. While we have no affiliation with the vendor other than a very positive history of sourcing a laundry list
Electronics Forum | Fri Mar 22 17:14:15 EST 2002 | jseagle
What is the height, width, and length of the connector, packaging? We currently place a 2x20 2mm gull wing SMT connector measuring 8mm H x 38mm L x 6.1mm W, packaged on tape and reel with a plastic pickup in the center. We do this on an Assembleon
Electronics Forum | Sun Mar 24 16:53:44 EST 2002 | mikestringer
We place a similar square pin style of connector on one of our products. The connector is a 22mm high HW series from Samtek. We have a Yamaha YVL88 MK1 and YV88XS set up to handle them (Yes they are rebadged as Philips machines in some markets). No
Electronics Forum | Thu Dec 08 19:38:02 EST 2022 | compit
for old Yamaha / Philips / Assembleon ...
Electronics Forum | Thu Feb 24 21:04:29 EST 2011 | ghosteye2011
Various kinds of high quality SMT nozzles, cutters, filters, etc. for more than 10 years, Assembleon nozzle, NXT nozzle, FUJI nozzle, Hitachi nozzle, JUKI nozzle, KME nozzle, Panasert nozzle, Philips nozzle, Samsung nozzle, Sanyo nozzle, Sony nozzle,
Electronics Forum | Mon Nov 19 02:30:09 EST 2018 | robl
OK, so all GEM Machines & MG were built by Yamaha, and imported in to Europe & USA and other places by Philips. After a while Philips developed it's own machine - the FCM. Philips then sold off it's SMT division and it was rebranded Assembleon.
Electronics Forum | Fri Sep 01 16:42:14 EDT 2023 | compit
I already see that most of these connectors are on trays - I just don't know if they are suitable for the machine. And I don't know what nozzles Yamaha/Assembleon/Philips use.
Electronics Forum | Thu Jan 10 07:08:04 EST 2002 | Dmitry
Hi! Try Philips / Assembleon http://www.assembleon.com and DEK http://www.dek.com. I have experience with them and like their service very much! They are very attentive and professional, even if you are located in CIS countries.
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
