Electronics Forum | Wed Jun 18 02:43:37 EDT 2014 | tjbooc
CHECK IO BOARDS STATUS, CHECK HEAD IO 24VDC SUPPLY, CHECK 24VDC SUPPLY TERMINAL, CHECK WIRING CONNECTED TO HEAD IO I think this is an I/O communication problem. Fail in connecting to I/O cards.
Electronics Forum | Tue Jun 17 10:46:16 EDT 2014 | bestglobalsmt
When the machine loads up it gets to the 2nd to last step where it starts to load vacuum data - we get 4 pop up windows once that fails. Ea2510 Machine Start error - Machine cannot be started Es00212 APPL CPU Haandshake error Ea2504 I/O Data trans
Electronics Forum | Wed Jun 24 14:42:03 EDT 2020 | kumarb
Hi. Heck no! First, you should find out the Yamaha equivalent of your machine, if known - that is a more common reference when sourcing parts. While we have no affiliation with the vendor other than a very positive history of sourcing a laundry list
Electronics Forum | Tue Jun 23 11:23:25 EDT 1998 | Russ Miculich
You have addressed two separate issues. We are stencil printer manufacturers and equipment choices can be a real tricky and frustrating proposition if not prepared with training and understanding of the process first. I would heartily encourage you
Electronics Forum | Tue Apr 13 18:16:41 EDT 2021 | mi123ms
Replacing the vision card 1B solved the issue. Thanks for your help, much appreciated.
Electronics Forum | Mon Apr 12 13:27:40 EDT 2021 | robl
You didn't pick an easy one to start with did you, the Sapphire is a particular beast that can either amaze or send users to the depths of dispair. If you are in Europe DM me & I'll send you some helpful contacts.
Electronics Forum | Thu Dec 01 16:14:45 EST 2005 | chunks
You need to verify if you're getting up to the needed temps. It looks like you're not. I'd say it started to reflow but never reached a long enough time. Nitrogen may help with further wetting.
Electronics Forum | Fri Feb 05 09:13:13 EST 2016 | emeto
Hello Greg, there are several things to be considered: I will start this investigation in the oven. Look in your cooling zones. Many ovens build up a lot of flux there(especially the ones with water cooling) and should be cleaned every so often.
Electronics Forum | Wed Oct 08 11:16:12 EDT 2014 | cbeneat
We are having an intermittent issue with a certain board on our wave solder line, machine is a Vitronics 6922 Delta Wave, leaded process. There are 2 fuse holders on one edge of the board that are not getting solder all the way thru the barrel every
Electronics Forum | Wed Mar 13 09:11:48 EDT 2013 | smt_guy
Hi All, Need your advice / help. We have assembleon pick-and-place machines and we got some pick-up issues on certain LED's that are Dome Type. The LED's get off from the tape pocket during feeding due to the dome of the LED sticks on the tape surfa
