Electronics Forum | Tue Jul 19 15:43:37 EDT 2005 | msjohnston1
We are trying to do a dispenser comparison study between the Asymtek Axiom X1020 with DJ9000 valve and the Camalot XyflexPro system. The system will have a dual purpose for dispensing epoxy dots and underfill. I would like to have comments positive
Electronics Forum | Tue Nov 21 14:02:34 EST 2006 | jimmyjames
We have 2 Assembleon Opal X II machines, each with 8 head upgrades placing up to 14k CPH. We have got quote back from Essemtec, Asymtek and Camalot. The thing that is holding us back the most is our realatively small budget of $50k US. Screen prin
Electronics Forum | Fri Apr 27 11:23:40 EDT 2007 | pjc
You can get reliable solderpaste dots down to 20-30mil dia. with Type 3. Accurate and repeatable dispensing machine for X-Y-Z placement of the dot is critical. Here are the leading machines: http://www.speedlinetech.com/camalot/index.aspx http://
Electronics Forum | Sat Feb 25 12:01:28 EST 2017 | ttheis
I'm setting up a asymtek millenium m-cob style dispenser for the first time and running through the master offsets routine but when it attempts to find the needle in the nsz needle sensor it works in the x direction but when it attempts to locate in
Electronics Forum | Mon Feb 20 14:56:22 EST 2012 | acsscott
Ok, so we figured out that if the LCS is connected, we don't get the error. So, the HDLC data buss gos out and back, or is terminated in the LCS. How to remove the LCS? We try to go into maintenance screen to change the machine configuration, and
Electronics Forum | Thu Oct 21 21:07:13 EDT 2021 | llawrence
Hi, Early this year, the company I work for released its first product using PCBs with SMT assembly. These boards are relatively simple with less than 30 components, mostly 0603 size resistors and capacitors with a few SOIC and one LQFP chip. These
Electronics Forum | Wed Feb 25 17:02:05 EST 1998 | Doug Romm
Just a comment to clarify this discussion. Typically chip caps and other passive components that use palladium plated to the end of the component are very different from the TI nickel/palladium plated IC components (leaded devices). The main di
Electronics Forum | Tue Nov 07 18:56:40 EST 2006 | Steve
Thanks guys! Very helpfull info. SWAG, the manufacturer states that this material can withstand up to 350 Celsius for a short time period (around 10-20 seconds). It is my understanding that Durostone absorbs heat very very slowly like ceramic thus
Electronics Forum | Sat May 30 01:31:49 EDT 2009 | mika
make 4 square rounded corner apertures on the ground pad and the total reduction of 20 % (80 % solder paste). Then you still be able to solder the terminals around. Don't worry to much of the void's. Just following my tips and you will be fine. The
Electronics Forum | Wed Jul 09 12:00:25 EDT 2014 | bobpan
You have a rather old machine that you are running....now realizing this you need to check some things. 1. Clean the scales in the x and y direction. On some of the encoders there is an led to see if its reading correctly....Usually it turns green b
A leader in automated fluid dispensing, jetting, and conformal coating. Products include stand-alone dispensing workstations and fully automated, in-line conveyorized systems with advanced process controls.
2765 Loker Ave. West
Carlsbad, CA USA
Phone: 760-431-1919
