Electronics Forum | Fri Aug 06 05:04:45 EDT 2021 | oxygensmd
Hello Everyone, I am looking for manual for the following equipments: Asys MPS 50D (mag buffer), Asys TDM 03 (telescoping conveyor), Asys AES01 (1mag loader), Asys LSB 03 (stacker). I hope you can help.
Electronics Forum | Wed Mar 31 06:05:04 EDT 2021 | micropak
Hello Everybody I am looking for the manuals of ASYS Un-Loader AMS01, in order to obtain the part number for the Toothed Belt of Pushing Rod assembly. Any help would be greatly appreciated.
Electronics Forum | Tue Feb 24 12:27:32 EST 2009 | ch
Hi All! Did anyone knows access codes for asys conveyors TRM-03 and AMS-05 and how this codes can be readed? I need to change some system settings. Thanks.
Electronics Forum | Mon Jan 12 08:02:06 EST 2015 | donb_68
I am interested in seeing de-panelization routers from ASYS and CTI in action. I am particularly interested in the Divisio 5100 and Divisio 2100 series routers from ASYS and the AR2020 and MR2 series routers from CTI. For the manual machines I would
Electronics Forum | Thu Apr 01 05:19:04 EDT 2021 | micropak
Thanks for the tip. I have the old belt and since it is too damaged (Steel wires showing up here and there)that measuring the length is probably not possible. I can however measure width and tooth pitch. I will give it a try. I have also requested A
Electronics Forum | Thu Apr 01 01:25:59 EDT 2021 | cbeneat
If you have the old belt, you can measure it up and see if Midwest industrial rubber(MIR-belting.com) can make what you need. Just a thought.
Electronics Forum | Wed Apr 07 10:32:56 EDT 2021 | micropak
Update: I have figured out that a 10T5 open belt 1450mm length will do the job.
Electronics Forum | Tue Aug 27 09:26:59 EDT 2013 | felo188
Hello, I have a problem with SMEMA communication between LSB 03 PCB destacker and DECK 265. Unfortunatelly LSB have 37-pin SMEMA socket. I am trying to make adapter. Based on datasheets of LSB and IPC SMEMA 9851. I tried various combinations but w
Electronics Forum | Sun Apr 12 08:49:12 EDT 2009 | mki
Hello, I bought used QUAD IVc MKII with transport in "as-is" condition, powered it up (without air and PCB on machine) and all axes (X, Y, Z AND T(heta)shows signs of life. Machine is performing HOME positioning self test. I am not familiar with QUA
Electronics Forum | Fri Jun 16 11:43:30 EDT 2006 | dseif
I agree with "Two Cents" that the initial cost is very high, however, we may be able to justify with savings associated with improved layouts (high volume mfg)... so I am also looking into laser depaneling at this time. I have stumbled upon three co
