Electronics Forum | Thu Nov 13 08:50:23 EST 2008 | evtimov
try Flux Atomization Flow - 15 CFH
Electronics Forum | Tue Aug 14 16:18:48 EDT 2018 | dontfeedphils
A couple of things to try as I just went through this myself. Checkout this link for pointers on plasma cleaning... http://www.nordson.com/~/media/Files/Nordson/march/Papers/The-Effects-of-Plasma-Treatment-Prior-to-Conformal-Coating-NordsonMARCH.p
Electronics Forum | Thu Mar 30 08:43:14 EST 2006 | russ
Does your fluxer provide for very fine atomization of the flux or is it more "droplet like" Great term huh?
Electronics Forum | Fri Jan 26 11:18:54 EST 2007 | samir
Chunks! Good to see you here. From what I've been taught, and from what I've read, the strength of the solder joint is in the intermetallic bond which occurs at the atomic level. A solder FILLET is an indicator that wetting took place.
Electronics Forum | Tue Jan 31 13:41:41 EST 2017 | tombstonesmt
Dow Corning 3-1953 is widely used when it comes to silicone based conformal coatings. Low odor, medium viscosity, can be atomized or needle dispensed. We have our operators fill syringe cartridges for any minor touch up.
Electronics Forum | Mon Aug 20 09:49:57 EDT 2018 | dontfeedphils
Not entirely clear on your question. We don't coat any of our hardware (assemblies are coated prior to hardware installation), so if coating needs to be reworked after this, then hardware removal is needed.
Electronics Forum | Wed Mar 08 12:41:10 EST 2023 | proceng1
Agreed. If it's just a means of propulsion/ atomization the purity probably isn't too critical.
Electronics Forum | Tue Jun 29 18:35:59 EDT 1999 | JohnW
| | Could somebody tell me what means Leaching, ie: "Leaching of terminal end face exposing the ceramic"? | | | Roberto: Leaching, according to the SMTnet Library of Terms: | | Leaching. Dissolution of a metal coating into liquid solder. Nickel ba
Electronics Forum | Mon Oct 26 11:11:48 EST 1998 | John Hardy
We have installed a Sonoflux atomized mist fluxing unit (Model 9500)on our Future 1 wave solder machine. We are concerned that the retrofitting of this unit may not have been appropriate for our equipment, as we are now experiencing many problems wi
Electronics Forum | Wed Nov 27 09:43:17 EST 2013 | mchawg
We recently rebuilt the generator and power supply on our '97 vintage Optiflux Ultrasonic fluxer. That cleared up all its issues except. Ultrasonics are reported by all indicators to be running in both Setup and Run mode, however, the nice rooster-t
.gif)
winsouce.jpg)